Advertisement
SARAD
GmbH
dVISION and dCONFIG:
Radon Vision, MyRIAM:
Endpoint
Beside the antenna connector, the endpoint offers one socket to connect the data cable of
the instrument (4 pins) and one more socket to connect an external power adapter (2 pins).
The instrument adapter may be powered alternatively by two AA batteries which can be
replaced easily. Because the adapter can be directly connected to the serial port, also older
instruments can be equipped with network functionality.
Connection process
As soon as the coordinator has been connected to the PC, all endpoints within the network
area will be scanned periodically. That means, if a new instrument enters the link area it
becomes associated after a while (few seconds). The coordinator provides a dynamic list
containing the information of the instrument connected to the endpoint. If a connection shall
be established, the used application software offers this list to select the desired instrument.
If an endpoint becomes powered and connected to an instrument, it reads the instrument ID
and sends the information to the coordinator. That means, if a new instrument shall be
Manual_NETmonitors_EN_31-07-12
NETmonitors
9600 baud
115200 baud
Advertisement
