Pre-Installation; Equipment Supplied; Software; Options - Gill WindMaster Pro User Manual

WindMaster and WindMaster Pro
________________________________________________________________________________________________________________________

5. PRE-INSTALLATION

5.1.

Equipment supplied

WindMaster or WindMaster Pro
Connector assembly comprising
Installation kit
User Manual (this document) on a CD.
5.2.

Software

software is available free at
W
IND
interface.
5.3.

Options

These options must be specified when ordering the WindMaster or WindMaster Pro.
Notes
See Section 4 Specification for more detail
Four Analogue outputs
Four Analogue inputs
PRT input
Wind tunnel calibration,
traceable to national standards
5.4.

Accessories

Travelling case - Portable protective case (WindMaster)
Travelling case - Portable protective case (WindMaster Pro)
Spare 31 way Clipper connector
Spare 15m lead - one end free, other end fitted with Clipper pins
Power Supply and Interface Unit (PCI)
Pipe mount adaptor
5.5.

Packaging

Whilst the WindMaster is being moved to its installation site, the unit should be kept in its packaging. All the packaging
should be retained for use if the unit has to be returned at any time.
Note that if the WindMaster is to be regularly moved around, a travelling case is available as an optional extra
5.6.

Installation requirements

PC requirement

The new software will operate with any PC with Windows software from Windows 98 onwards.
W
IND
The PC must be fitted with a suitable interface to match the chosen communication format - RS232, RS422, or
RS485. Alternatively a Gill Power Supply and Interface (PCI) may be used to convert RS422/485 output to
RS232.
1561-PS-0001.
31 way Clipper connector
Solder bucket pins
Sealing gland and washer
Four M6 stainless steel nuts, bolts and shake-proof washers
www.gill.co.uk , and is strongly recommended as it provides an easy, user-friendly
WindMaster
12 or 14 bit (specify)
12 or 14 bit (specify)
Not available
Specify when ordering *
* Units may be returned to Gill for Wind tunnel calibration.
Item
9
Issue 3 March 2007
WindMaster Pro
14 bit
14 bit
Specify when ordering
Specify when ordering *
Part No
1210 - 30 -074
1561 - 00 - 028
1561 - PK - 050
1561 - 10 - 018
1189 - PK - 021
1561 - 30 - 025