Troubleshooting - TMP Citrocasa Revolution 10.000 Original Instruction

5. TROUBLESHOOTING

PROBLEM
The machine is not working
Display shows "End position"
Display shows "Feeder tube"
Display shows "Fruit sieve
supporter"
Display shows "Front cover"
Display shows "Peel Bucket"
Display show an error message,
although all parts are mounted
according to the instruction
manual.
The machine has blocked often
during the pressing process.
Press elements are not
synchronized
You can hear the motor but the
press elements are not turning.
The machine stops running
periodically
The machine stops often
DISPLAY: OVER
25
POSSIBLE CAUSE
Check if machine is plugged
into power outlet
No electricity from power outlet
Main switch off
ON/OFF switch damaged
The press elements are
blocked
Safety detectors are damaged.
Switching circuit is damaged
Magnet switch for the end
position is damaged
Feeder tube/Inlet tunnel
mounted incorrectly
Fruit sieve supporter mounted
incorrectly.
Front cover mounted
incorrectly.
Peel Bucket mounted
incorrectly.
Security-Magnet is loosen or
the magnet switch is damaged.
Power supply voltage is
insufficient.
Switching circuit damaged
Gear wheel or axle is
damaged
Malfunction inside the machine
Overload
Overload
SOLUTION
Connect to power source
Check the power outlet for
electricity
Check if main switch on the side
of machine is switched on.
Contact your customer service
representative.
Unplug the machine from its
electricity source and remove the
object which is blocking the
machine in the press elements.
Contact your customer service
representative.
Contact your customer service
representative.
Contact your customer service
representative
Mount the Feeder tube/Inlet
basket according to the instruction
manual.
Mount the fruit sieve supporter
according to the instruction
manual.
Mount the front cover according to
the instruction manual.
Mount the Peel Bucket according
to the instruction manual.
Contact your customer service
representative.
Check if the power supply
coincides with that which is
mentioned in the instruction
manual.
Contact your customer service
representative.
Contact your customer service
representative.
Contact your customer service
representative.
Contact your customer service
representative.
Contact your customer service
representative.