Scientific Atlanta EXPLORER 2000 User Manual page 6

Important Rules for Safe Operation,
Power Sources
A label on this equipment indicates the correct power source for this equipment.
Operate this equipment only from an electrical outlet that has the voltage and
frequency that the label indicates.
If you are unsure of the type of power supply to your residence, consult Scientific-
Atlanta, Inc., or your local power company.
WARNING:
Avoid electric shock and fire hazard. Do not overload electrical outlets and
extension cords. For equipment that requires battery power or other sources to
operate, refer to the operating instructions for that equipment.
Grounding
This equipment has a two-prong plug. Properly ground (earth) this equipment by
inserting the plug into a grounded electrical, two-socket outlet. If this plug is polar-
ized it has one wide prong and one narrow prong. This plug fits only one way. If you
are unable to insert this plug fully into the outlet, contact an electrician to replace
your obsolete outlet.
Power Cord Protection
Arrange all power cords so that people cannot walk on the cords, place objects on
the cords, or place objects against the cords, which can damage the cords. Pay
particular attention to cords that are at plugs, at electrical outlets, and at the places
where the cords exit the equipment.
Lightning and Power Surges
Ground (earth) your cable system to provide some protection against voltage surges
and built-up static charges. If you have questions, call your cable company.
Servicing
Do not open the cover of this equipment. If you open the cover, your warranty will be
void. Refer all servicing to qualified personnel only. Contact your cable company for
instructions.
vi EXPLORER 2000 User's Guide
Continued
Continued on next page
565069 Rev B