How To Install The Bypass Module - Scientific Atlanta EXPLORER 2000 User Manual

Optional Features,

How to Install the Bypass Module

The EXPLORER 2000 provides a bypass feature that allows you to view an
analog channel while recording a digital (or analog) channel on your VCR.
1. Bend the metal tab to the
Bypass connection toward you,
then pull the tab off to prevent it
from falling into the EXPLORER
2000.
2. Hold the Bypass module
with the connector
labels facing right
side up and
toward you.
Insert the
multi-cable
connector
on the
Bypass
module into
the Bypass connection on the EXPLORER 2000.
3. Insert the Cable In connector on the Bypass module into the Cable In
connection on the EXPLORER 2000 unit. The multi-cable connector folds
into the inside of the Bypass module.
4. Align the mounting tabs on
the Bypass module with
the screw holes on the
EXPLORER 2000 back
panel, then finger tighten the
screws (supplied with the
Bypass module) to hold the
module in place against the
back panel.
5. Connect your TV and VCR
to the Bypass module as
shown.
1 3
Continued
MODEL E2051-X01
TO
TV
FROM CABLE
VCR INPUT
Bypass Module
(Outside View)
VCR
OUT TO
TV
CABLE
OUT
EXPLORER 2000 User's Guide
CABLE IN
CABLE
OUT
BYPASS
1
2
3
Bypass Module
(Inside View)
TV
IN TO OUT TO
VCR TV
5
MODEL E2051-X01
CABLE IN
TO
TV
4
FROM CABLE
BYPASS
VCR INPUT
T6431
Cable Input
From Wall
T6432
565069 Rev B