Belimo ZTH-PICCV Operating Instructions

o p e r at i n g i n s t r u c t i o n s
ZtH-piccV
The ZTH-PICCV is a tool created to easily
adapt the flow settings for the PICCV in the field.
It directly connects to the Belimo actuator.

ImporTanT:

There are two ways to connect the tool to the actuators
Lr, ar, Gm Series
Use the interface on the top of the
actuator. (Leave all of the wires of
the actuator installed.)

Re-PRoGRAMMInG PRoCeSS:

Step 1

Connect cable to actuator port, twist to lock in place (or wire as above).
Will display actuator for 5 seconds – note this and compare to actuator
being connected.
LRX24-MFT
Belimo AirControls(USA), Inc.
•
1 2 3 5
Y U
WT bl Tq
ZTH-PICCV
TF, LF, aF Series
Connect to the installed wires of
the actuator. (Leave all of the wires
of the actuator installed.)
203.791.9915 www.belimo.com
•

Technical Information

Supply
Communication
Used with actuator types

Step 2

Start pICCV proCESS press ok will be displayed. Press ok.
sTaRT piccv
pRocess press ok
24 VAC/DC
PP
LRX24-MFT
TF24-MFT US
LF24-MFT US
ARX24-MFT
AF24-MFT
GMX24-MFT
continued on other side