Schumacher SCF-10000A SpeedCharge Owner's Manual

Fully automatic microprocessor controlled battery charger with engine starter plus battery tester for 6 and 12-volt batteries
Table of Contents

Advertisement

Available languages

Available languages

OWNER'S MANUAL
Model SCF-10000A
For 6 and 12-Volt Batteries
Fully Automatic
Microprocessor Controlled
Battery Charger with
Engine Starter plus
Battery Tester
CAUTION:
Read all Safety Rules and Operating Instructions,
and follow them with each use of this product.
Schumacher Electric Corporation
Mount Prospect, IL 60056 U.S.A.
Send Warranty Product Repairs to:
Customer Service Returns
P.O. Box 280,1025 E. Thompson, Hoopeston, IL 60942-0280
Questions? Call Customer Service: 1-800-621-5485
0099000450/0605

Advertisement

Table of Contents
loading

Summary of Contents for Schumacher SCF-10000A SpeedCharge

  • Page 1 OWNER’S MANUAL Model SCF-10000A For 6 and 12-Volt Batteries Fully Automatic Microprocessor Controlled Battery Charger with Engine Starter plus Battery Tester CAUTION: Read all Safety Rules and Operating Instructions, and follow them with each use of this product. Schumacher Electric Corporation Mount Prospect, IL 60056 U.S.A.
  • Page 2: Table Of Contents

    LIMITED WARRANTY ... 16 PLEASE SAVE THIS OWNER’S MANUAL AND READ BEFORE EACH USE. Model SCF-10000A, Fully Automatic Battery Charger/Tester and Engine Starter, offers features to accommodate the needs for home or light commercial use. This manual will explain how to use the battery charger safely and effectively. Please read and follow these instructions and precautions carefully.
  • Page 3: Important Safety Instructions

    Wash hands after handling. • Read all instructions and cautions printed on the battery charger, battery, and vehicle or equipment using battery. • Use charger only on lead-acid type rechargeable batteries, such as those used in cars, trucks, tractors, air- planes, vans, RV’s, trolling motors,...
  • Page 4: Personal Safety Precautions

    • Always operate the battery charger in an open, well-ventilated area. • Never smoke or allow a spark or flame in the vicinity of the battery or engine.
  • Page 5: Before Using Your Battery Charger

    BEFORE USING YOUR BATTERY CHARGER It is important to understand the charger’s requirements. This section explains the charger’s electrical requirements and how to prepare a battery for charging. PLUGGING IT IN Your charger requires a 120V AC receptacle installed according to all local codes and ordinances.
  • Page 6: Operating Instructions

    OPERATING INSTRUCTIONS IMPORTANT: Follow all safety instructions and precautions when charging your battery. Wear complete eye protection and clothing protection. Charge your battery in a well-ventilated area. CHARGING BATTERY IN THE VEHICLE: 1. Avoid personal injury by keeping clear of fan blades, belts, pulleys and other engine parts.
  • Page 7: Charging Battery Removed From The Vehicle

    8. Clean and store the charger in a dry location. USING ENGINE START Your battery charger can be used to jump start your car if the battery is low. Follow these instructions on how to use the ENGINE START feature.
  • Page 8: Charger Controls

    Use this switch button to set the type of battery to be charged to one of the following. CHARGER CONTROL SCF-10000A CONTROL PANEL • 12V REGULAR: This is the type of battery usually used in cars, trucks, and motorcycles. These batteries have vent caps and are often marked “low maintenance”...
  • Page 9: Control Panel Guide

    CONTROL PANEL GUIDE...
  • Page 10: Using The Built-In Battery Tester

    USING THE BUILT-IN BATTERY TESTER OVERVIEW This battery charger has a built-in battery tester that displays either an accurate battery voltage or an estimate of the battery’s relative charge based on the battery voltage and the Battery Council International scale.
  • Page 11: Using Your Engine Starter

    USING YOUR ENGINE STARTER OVERVIEW The 10000A has an engine start function that can be used to jump start your vehicle if the battery is low by providing 100 amps of current to assist engine cranking. STARTING SEQUENCE There are a few basic steps involved when using the engine start function.
  • Page 12: Using Your Battery Charger

    USING YOUR BATTERY CHARGER OVERVIEW Using this battery charger is very simple. First, connect the battery and AC power following the precautions listed under “OPERATING INSTRUC- TIONS”. Then select the appropriate BATTERY TYPE and CHARGE RATE for your battery. The charger will then do everything automatically.
  • Page 13: Charging Tips

    Read this entire manual before using your charger. The tips below serve only as a guide for specific situations. If your vehicle won’t start: You don’t need to fully charge a battery to start your vehicle. If the charger won’t start your vehicle using the 100A START rate, try charging the battery using the 40A rate for 10 or 15 minutes.
  • Page 14: Battery Percent And Charge Time

    BATTERY PERCENT AND CHARGE TIME This charger adjusts the charging time in order to charge the battery com- pletely, efficiently and safely. The microprocessor automatically makes the necessary decisions. However, this section includes guidelines that can be used to estimate charging times. The duration of the charging process depends on three factors: 1.
  • Page 15: Troubleshooting

    The battery is connected and the charger is on, but it isn’t charging. Indicator lights are lit in an erratic manner not explained in the “Using Your Battery Charger” section. The CHECK (red) light always flashes before the battery is completely charged.
  • Page 16: Maintenance And Care

    MAKES THIS LIMITED WARRANTY TO THE ORIGINAL PURCHASER AT RETAIL OF THIS PRODUCT. THIS LIMITED WARRANTY IS NOT TRANSFERABLE. Schumacher Electric Corporation warrants this battery charger for five years from date of purchase at retail against defective material or workmanship. If such should occur, the unit will be repaired or replaced at the option of the manufacturer.
  • Page 17 Manuel d’utilisation Modèle SCF-10000A Pour batteries de 6 et 12 V Chargeur de batterie microprocessorisé entièrement automatique avec circuit de démarrage d’urgence, testeur de batterie Attention : Lire attentivement les consignes de sécurité et d’utilisation de ce dispositif et les observer à chaque emploi.
  • Page 18 UTILISATION. Le chargeur de batterie entièrement automatique à testeur et circuit de démarrage d’urgence modèle SCF-10000A est doté de caractéristiques qui lui permettent de répondre aux besoins d’un usage domestique ou commercial léger. Ce manuel vous montre comment utiliser le chargeur de batterie de façon sûre et efficace. Il importe de le lire attentivement et de suivre toutes les consignes.
  • Page 19: Consignes De Sécurité Importantes

    CONSIGNES DE SÉCURITÉ IMPORTANTES ATTENTION : RISQUE DE GAZ EXPLOSIFS TRAVAILLER À PROXIMITÉ D’UNE BATTERIE AU PLOMB-ACIDE EST DANGEREUX. EN FONCTIONNEMENT NORMAL, LES BATTERIES PRODUISENT DES GAZ EXPLOSIFS. POUR CETTE RAISON, IL EST D’UNE IMPORTANCE CAPITALE QUE VOUS LISIEZ ATTENTIVEMENT CE MANUEL ET QUE VOUS SUIVIEZ LES CONSIGNES À...
  • Page 20: Mesures De Sécurité Personnelles

    faites une lecture au densimètre ou lorsque vous remplissez la batterie. Ne posez jamais la batterie sur le chargeur. Ne placez jamais le chargeur directement au-dessus d’une batterie en cours de charge. Les gaz produits par la batterie pourraient faire corroder le chargeur et l’endommager.
  • Page 21: Avant D'utiliser Le Chargeur De Batterie

    AVANT D’UTILISER LE CHARGEUR DE BATTERIE Il est important de bien comprendre le fonctionnement du chargeur. On explique dans cette section les exigences électriques du chargeur et la préparation de la batterie à charger. BRANCHEMENT Le chargeur doit être branché dans une prise de 120 V CA installée selon le code de l’électricité...
  • Page 22: Consignes D'utilisation

    CONSIGNES D’UTILISATION IMPORTANT : suivez toujours les consignes de sécurité lorsque vous chargez une batterie. Portez toujours des lunettes de sécurité et des vêtements de protection. Chargez toujours la batterie dans un endroit bien aéré. CHARGE DE LA BATTERIE DANS LE COMPARTIMENT MOTEUR : 1.
  • Page 23: Charge De La Batterie Hors Du Véhicule

    CHARGE DE LA BATTERIE HORS DU VÉHICULE : POSITIF BATTERIE CÂBLE DE 61 cm (24 po), calibre 6 1. Repérez la polarité des bornes de la batterie. La borne positive est marquée des symboles POS , P ou + et la borne négative, des symboles NEG , N ou - .
  • Page 24: Tableau De Commande Du Chargeur

    DEL d’état EN COURS CHARGÉE DE CHARGE Commutateurs TABLEAU DE COMMANDE DU MODÈLE SCF-10000A COMMUTATEUR DE MODE D’AFFICHAGE Actionnez ce commutateur pour régler l’affichage à l’un des modes suivants : • BATTERIE % : l’affichage montre la charge approximative en pourcentage de la batterie qui est reliée au chargeur.
  • Page 25: Guide - Tableau De Commande

    GUIDE – TABLEAU DE COMMANDE...
  • Page 26: Utilisation Du Testeur De Batterie Intégré

    UTILISATION DU TESTEUR DE BATTERIE INTÉGRÉ APERÇU Ce chargeur comporte un testeur de batterie intégré qui vous donne une lec- ture exacte de la charge de la batterie ou un estimé de la charge relative de la batterie basé sur le voltage de la batterie et l’échelle du Battery Council Interna- tional.
  • Page 27 En conséquence, le testeur pourrait afficher des valeurs erronées à ce mo- ment. Pour une lecture plus juste, il suffit d’éliminer la charge de surface en créant une demande temporaire sur la batterie du véhicule, comme allumer les phares ou d’autres accessoires. Le pourcentage est mesuré...
  • Page 28: Utilisation Du Circuit De Démarrage D'urgence

    UTILISATION DU CIRCUIT DE DÉMARRAGE D’URGENCE APERÇU Le chargeur de batterie modèle 10000A comprend une fonction de démarrage d’urgence qui peut être utilisée pour faire démarrer le moteur lorsque la batterie est faible. Le chargeur fournira alors 100 A au système de charge pour faire démarrer le moteur.
  • Page 29: Utilisation Du Chargeur De Batterie

    UTILISATION DU CHARGEUR DE BATTERIE APERÇU L’utilisation du chargeur de batterie est très simple. Il suffit de raccorder le chargeur à la batterie puis de le brancher dans une prise CA conformément aux consignes de sécurité énumérées à la section «...
  • Page 30: Pourcentage Et Temps De Charge

    marche que pour une courte durée, il se peut que vous ayez à charger la batterie de nouveau pour que le moteur puisse redémarrer. Ranimer la batterie : si vous désirez recharger la batterie juste assez pour pouvoir utiliser votre véhicule, il n’est pas nécessaire de faire un cycle de charge complet.
  • Page 31: Tableau De Dépannage

    TABLEAU DE DÉPANNAGE L’utilisateur peut remédier lui-même à plusieurs problèmes qui peuvent se présenter. Veuillez consulter le tableau ci-dessous pour connaître la solution aux problèmes courants. ANOMALIE La batterie est reliée au chargeur et le chargeur est branché, mais la batterie ne se charge pas.
  • Page 32: Entretien

    OFFRE LA GARANTIE LIMITÉE SUIVANTE À L’ACHETEUR INITIAL AU DÉTAIL DE CE PRODUIT. CETTE GARANTIE LIMITÉE N’EST PAS TRANSFÉRABLE. Schumacher Electric Corporation garantit ce chargeur de batterie pour une période de cinq ans à compter de la date d’achat au détail contre tout vice de matériau ou de fabrication.

Table of Contents