Cameo Q SPOT User Manual page 9

SYSTEM INFORMATION (System Info)
To read a variety of system information, press the MODE button repeatedly until "Menu DMX Addr" or "Menu Mode" appears in the display.
Select the menu item "Menu System Info" using the UP and DOWN keys and press ENTER. Use the UP and DOWN controls to select the
desired sub-menu item, and press ENTER to display the corresponding information.
System Info
Firmware = display software
version
Temperature = display LED
temperature in
degrees Celsius or
Fahrenheit
Op.Hours = display operating
time in hours
Menu ENTER
System Info
UP/DOWN
V1.xx
Temperature LED
Temperature
C/F
xxxxh
System Info
ENTER
Firmware
/
ENTER
System Info
Temperature
UP/DOWN
/
System Info
ENTER
Op. hours
Press ENTER to display information
= display temperature by pressing ENTER
= select temperature unit to degrees Celsius or degrees Fahren-
heit. Confirm with ENTER
Press ENTER to display information
Software version
V1.xx
Temperature Temperature
/
LED
ENTER ENTER - UP/DOWN
Temperature
xxxC/F
Op. hours
xxxh
C/F
Unit Unit
/
C F
ENTER ENTER
9