Other Countries - Compaq QVision Graphics System Installation Manual

QVision Operations and Installation Guide

OTHER COUNTRIES

1.
2.
3.
For more information about power cord set requirements, consult your
Authorized COMPAQ Computer Reseller or your Authorized COMPAQ
Service Provider.
The cord set fittings must bear the certification mark of the agency
responsible for evaluation in a specific country. Acceptable agencies
include the following:
BSI (United Kingdom)
CEBEC (Belgium)
DEMKO (Denmark)
EANSW (Australia)
SETI (Finland)
IMQ (Italy)
KEMA (The Netherlands)
The flexible cord must be of a HAR (harmonized) type HO5VVF
3-conductor cord with a minimum conductor size of .03 square
inches (1.0 square millimeter).
The cord set must have a current capacity of at least 10 amperes and
a nominal voltage rating of 125 or 250 VAC, as required by the
specific country's power system.
NEMKO (Norway)
OVE (Austria)
SEMKO (Sweden)
SEV (Switzerland)
UTE (France)
VDE (Germany)
MITI (Japan)
B-2