AcousticSheep Sleepphones Instruction Manual

AcousticSheep Sleepphones Instruction Manual

Hide thumbs Also See for Sleepphones:

Advertisement

Instruction Guide for SleepPhones® Classic
1
1. Holding the SleepPhones® in your hands, you'll
notice the flat speakers - one on each side - inside of
the headband.
3
1
1. There is a hook & loop opening at
the back of the headband. Open to
reveal the speaker components
inside the headband.
How to Wear your SleepPhones®
head. The cord comes out the hook & loop opening
3. Once the headband is on, you'll want to adjust the
speakers so that they are positioned directly over your
ears. This will ensure great sound quality. Please note

Removing the Speakers

2
2. Pull very gently on the speakers,
one at a time, to remove them from
the headband.
2
2. Place the headband on your head. Note that the
SleepPhones® logo tag goes at the back of your
at the back of the headband.
that the speakers move inside of the headband,
independently of the headband.
3
removed, you can machine-wash
!
3. Once the speakers are
the headband.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sleepphones and is the answer not in the manual?

Questions and answers

carol
January 27, 2025

my phone does not find the sleep phone so it won't link

1 comments:
Mr. Anderson
February 10, 2025

If your AcousticSheep SleepPhones® won't connect to your phone, try these troubleshooting steps:

1. Ensure Bluetooth is Enabled – Make sure your phone's Bluetooth is turned on.
2. Check Compatibility – SleepPhones® Wireless and SleepPhones® Effortless™ are compatible with Bluetooth-enabled devices.
3. Pairing Mode – Put your SleepPhones® in pairing mode by following the device instructions.
4. Distance – Stay within the 15-30 feet (5-10 meters) wireless range for proper connection.
5. Battery Charge – Ensure your SleepPhones® are charged (charging time is about 3 hours).
6. Remove Interference – Avoid other Bluetooth devices that might cause interference.
7. Forget and Reconnect – Delete the SleepPhones® from your phone’s Bluetooth settings and try re-pairing.

If the issue persists, contact AcousticSheep Customer Service via email at service@acousticsheep.com or call 877-838-4790, available Monday-Friday, 8 AM - 5 PM EST.

This answer is automatically generated

Subscribe to Our Youtube Channel

Summary of Contents for AcousticSheep Sleepphones

  • Page 1 2. Place the headband on your head. Note that the 1. Holding the SleepPhones® in your hands, you’ll SleepPhones® logo tag goes at the back of your notice the flat speakers - one on each side - inside of head. The cord comes out the hook & loop opening the headband.
  • Page 2 Reinserting the Speakers 1. The right speaker will have red 2. Insert the speakers, one at a 3. Then insert the junction pad stitching. The left speaker will have into the headband and close the time, about four inches from the green stitching.

Table of Contents

Save PDF