Advertisement
Welcome to the AcousticSheep® Family!
This User Guide has helpful tips and info for using and enjoying your new AcousticSheep® SleepPhones® or RunPhones® Wireless.
Scan this QR code or visit www.SleepPhones.com/instructions to read this User Guide as well as Warranty Information and Legal disclosures in additional languages.
Please Note: The speakers move inside of the headband, independently of the headband.
Bluetooth® Module
Power On: Press and hold center button for 5 seconds
Volume: Click the arrows to increase or decrease the volume
Skip Tracks: Double click arrows to skip tracks
Play/Pause: Click the center button once to play or pause
Power Off: Press and hold the middle square button on the Bluetooth® module for 3 seconds until you hear descending tones through the speakers
Not Sure if Fully Charged? While charging, if the red light is on, the module is not fully charged. If there is NO light on at all while charging, the Bluetooth® module is fully charged.
Unable to Pair for the First Time? When you turn on the module, make sure to continue holding down the button for a full 5 seconds until you hear ascending tones followed by a series of beeps. The beeps indicate that the module is in pairing mode.
Unable to Pair? If your Bluetooth® enabled device is unable to pair with the Bluetooth® module, you may need to reset the module and/or your device. To reset the Bluetooth® module, turn it on then hold both the "up" and "down" arrow buttons down for 7 seconds. Once the reset function is complete, there will be 2 long tones. The Bluetooth® module must be turned off and then turned back on for it to enter into pairing mode.
Unable to Find Device while Pairing? If your AcousticSheep® module was previously paired with another device, it will automatically pair with that device if the device is within range. Make sure that the Bluetooth® on all other previously paired devices is turned off when you are pairing with a new device.
No Sound When Paired
LIMITED ONE-YEAR WARRANTY
Please refer to www.SleepPhones.com/warranty for full details regarding the AcousticSheep LLC Limited Warranty.
CUSTOMER SERVICE
The answers to most setup and performance questions can be found in the FAQs at www.SleepPhones.com/faqs or www.RunPhones.com/faqs.
Visit www.SleepPhones.com/instructions to read this User Guide as well as Warranty Information and Legal disclosures in additional languages.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc., and any use of such marks by AcousticSheep LLC are under license. Other trademarks and trade names are those of their respective owners.
© 2018 AcousticSheep LLC. All rights reserved. SleepPhones®, RunPhones®, the SleepPhones® logo, the RunPhones® logo, and "pajamas for your ears" are trademarks or a registered trademark of AcousticSheep LLC. Unauthorized duplication is a violation of applicable law. US Patent No. 8,213,670 and 9,924,271. Other US and international patents pending.
Still have questions? Contact our customer service team M-F from 8-5pm EST at 877-838-4790 or at service@acousticsheep.com.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download AcousticSheep Wireless SleepPhones RunPhones Manual
Advertisement
Need help?
Do you have a question about the SleepPhones Wireless and is the answer not in the manual?
Questions and answers