AcousticSheep SleepPhones Classic User Manual

INSTRUCTIONS
ANLEITUNG INSTRUÇÕES
說明書
INSTRUCCIONES
ISTRUZIONI 说明书
Scan this QR code or visit www.SleepPhones.com/instructions
to read this User Guide as well as Warranty Information and
Legal disclosures in additional languages.
SLEEPPHONES OR RUNPHONES
SleepPhones ® and RunPhones
®
(Wired Headphones)
3.5 mm
Headband
Speakers and Cord
/

WEARING YOUR CLASSIC HEADPHONES

指示書
명령
‫تاميلعت‬
CLASSIC
® Classic
®
Holding the headband, you'll notice the flat
1
speakers – one on each side – inside of the
headband.
2
Place the headband on your head (tag towards
the back).
3
Once the headband is on, adjust the speakers
so they are positioned directly over your ears.
This will ensure the best sound quality.
Please Note: The speakers move inside of the headband,
independently of the headband.
/

WASHING INSTRUCTIONS

1
Open the hook and loop at the
back of the headband to reveal
the speaker components inside
the headband.
2 Reach in to remove the
speakers, one at a time,
from the headband.
3 Once the speakers are
removed, you can machine-
wash the headband.
Reinsert one speaker at a time,
4
and move each about four inches from
the hook and loop opening on either side
of the headband.
• Right speaker has red stitching
• Left speaker has green stitching
• Softer gray side should face towards the ear
• White side should face away from the ear
Close the hook and loop opening with the cord hanging
5
out so you can connect to your device.

PROLONG THE LIFE OF YOUR HEADPHONES

• When disconnecting the cord, grasp and pull the plug
and not the cord.
• Do not leave components in a wet or dirty headband.
• Wash your headband regularly (remove all components
before washing).
• Avoid bending near the plug and keep the cord free of
tangles and knots.
/