Advanced Use: Program Connection And Power To Devices - PrimaLuceLab EAGLE3 Manual

P r i m a L u c e L a b i S r l E A G L E 2 U s e r M a n u a l

Advanced use: program connection and power to devices

Within the ADVANCED SETTINGS window, you can set how EAGLE Manager must set all connection ports (except for the
USB 3.0 ports that will always be active) when EAGLE is turned on or off. This way you can, for example, schedule to turn
on or turn off your devices when you turn on or off EAGLE. The "Configuration after startup" field allows you to set the
status of ports when EAGLE startups, the "Configuration before shutdown" field allows you to set the status of the ports
when EAGLE is shutdown (Image 37).
Immagine 37: ADV ANCED SETTINGS window
To enable this feature, just select "Enable" for the two fields. To set the configuration you want to get, click OK to exit this
window, then set the EAGLE USB and power out ports to the status you want to keep as preconfigured when you startup
the EAGLE. Then click on ADVANCED SETTINGS again and, within the "Configuration after startup" area, click on the "Load
from current configuration" button. The current configuration of EAGLE ports will be saved and applied each time you turn
on the EAGLE.
Repeat the procedure for the "Configuration before shutdown" field if you want that, when you turn off EAGLE, ports are
always set to a particular state.
p a g e ! 3 3