NavSpark RTK-EB1 Quick Manual page 9

A. Configuring RTK-EB1 Using GNSS Viewer (4/5)
• Setup as Base (unknown antenna position)
When later in use, after base RTK-EB1 gets position fix and self‐surveyed for 60 seconds, it enters
into static mode. Next time powering on the base RTK-EB1, it will still start from survey mode
again, self‐survey for 60 seconds, with self‐surveyed antenna location at different location unless
static mode is chosen and a fixed position is entered. To see what the self‐surveyed latitude,
longitude, and altitude values are, from GNSS Viewer RTK pull‐down menu, select Query RTK Mode
And Operational Function.
To use the base at some fixed location, use these steps to self‐survey and retrieve surveyed antenna
position, then set the antenna position into the base RTK-EB1.