Schlage B-Series Manual page 13

Strikes
All B-Series strikes are fully reversible for right handed and left
handed doors and are furnished complete with screws. Strike
boxes are also included with all standard strikes. B-Series
deadbolt strikes are also packed with our exclusive wood frame
reinforcer for added protection against "kick-in" attack.
Standard Strike Strike Box
Strikes for Deadbolts
Number Lip Length Description
10-055 — 1
10-064 — 1
10-087 1 1
10-092 1 1
10-094 — 1
10-095 1 1
B250-283 — Box for standard strike
Strikes for Deadlatches
Number Lip Length
1 1 1 1
10-001
1 1
10-004 1
10-025 1 1
C603-623 —
K510-066 —
Rabbeted Latch
and Strike Kit
39-030
The rabbeted latch and strike kit adapts square corner latches
and strikes for " rabbeted door and frame preparations.
Finishes: 605 and 626 only.
Drive-In Strike
x 2 x Square Corner, B600/700/800
Circular drive-in
x 4 ANSI
x 2 Radius round corner
x 2 x Square Corner, BC100
x 2 Full lip, no box
Description
1 x 2 Square Corner
1 x 2 Radius round corner
1 x 4 ANSI
Box for T-strike
Box for ANSI strike
Wood Frame Reinforcer
37-016
3 Screws
(76 mm)
Strike
Wood Frame
Reinforcer
Furnished with standard and round corner deadbolt strikes, this
reinforcer significantly strengthens a jamb against "kick-in"
attack and greatly increases the security of the lock. The
reinforcer is concealed under the strike and is anchored to the
jamb with two 3" long screws.
Thumbturn Assemblies and Inside Plate
B220-004 B202-672
BC160 B250 with holdback
(standard)
12-617 for B660/760/860
12-618 for B663/763/863
B
S E R I E S
Jamb
Stud
B202-671
B250 without holdback
12-626
B661/761/861
13