Cel-Fi GO M Quick Start Guide Smart Signal Booster ™ Cel-Fi GO M is optimized for mobile applications such as trucks, boats, and RVs. It features the IntelliBoost technology which allows it to ™ automatically adjust to the fast changing cellular network conditions as you move.
Page 2
Cel-Fi WAVE. Connect to Cel-Fi GO M with a bluetooth enabled mobile device, and manage the boost settings. NEMA 4 Rating The Cel-Fi GO M is NEMA 4 rated, and can be used both indoors and outdoors. The NEMA 4 rating provides the following advantages: •...
EN 301 489-50 v2.2.0 EN 301 908-1 v11.1.1 EN 301 908 v11.1.2 EN 301 908 v11.1.2 EN 300 328 v2.1.1 EN 62311 (2008) Regulation (EC) 1275/2008 (Standby and Off mode) Regulation (EC) 278/2009 (External Power Supply) Cel-Fi GO M: Smart Signal Booster...
Cel-Fi GO M Installation Before You Begin Cel-Fi GO has a Donor Antenna Port and a Server Antenna Port. They are marked on the device with icons (see illustration). It is critical that the Donor and Server antennas are connected to the correct port.
Page 5
Best to make sure all cable lengths support the intended plug in at this time. mounting location BEFORE permanent mounting. Connect Donor & Server Antennas to the Cel-Fi GO M Unit Donor Antenna Server Antenna Cel-Fi GO Plug in Cel-Fi GO M...
User Interface Cel-Fi GO M features an LED on the top face to indicate the unit’ s state: MEANING Solid GREEN The unit is working properly and boosting properly. Blinking GREEN Unit is scanning for networks to boost. Blinking RED The unit is in an error condition.