Remote Control - Parasound 200 Pre Owner's Manual

Remote Control

Off & On
These buttons turn the power on and off.
Set
The Set button is used in conjunction with other buttons for setting up some
features. These features include setting the turn on volume, Mem (favorite)
volume, renaming the inputs and adjusting the input level offsets. See page
14 and 15 for instructions on how to use these features.
☼
Remote Backlight Button
Pressing this button backlights the buttons with a soft blue glow. The
backlight will time-out after approximately 8 seconds or you can press the
button a second time to turn back lighting off immediately.
Dim
Press this button to select one of the volume display's two brightness levels.
Sub On/Off
Press this button to turn both subwoofer outputs on or off.
Balance Left & Right
Use these buttons to shift the balance to the left or right. This can be helpful
to compensate for speaker placement or room acoustics. The maximum
adjustment is 15dB.
Volume ▲ and ▼
The + and – buttons increase and decrease the volume level.
Mute
Press to mute the audio. Pressing a second time will unmute the audio. The
mute is also turned off automatically if you increase or decrease the volume
or if you power the unit off and back on again.
Vol Mem (Volume Memory)
This button recalls the volume setting you have memorized. This is a
convenient way to jump to your favorite volume setting. This Volume
memory is different than the turn on volume setting. See page 14.
Tone Flat
This button resets the Treble and Bass settings to zero (flat). The subwoofer
level will not be changed.
Inputs Buttons
These buttons select the input you wish to hear.
Bypass
This button selects the Bypass input. The Bypass input is also automatically
selected when the unit is turned off. See page 8.
Input Name ◄ and ►
Press the "Set" button and then these buttons to change the name of the current input. See page 15.
Bass & Treble +/-
Raise or lower the amount of bass and treble with these buttons.
Subwoofer +/-
Raise or lower both subwoofer #1 and #2 output levels simultaneously with these buttons.
Parasound ® 200 Pre Owner's Manual
Page 13