Advertisement
Quick Links
CSM-TR
SQ-29200
SM-TR
CESM-TR3
Lifting kit for motor support for TR3
TI-CSM
AP-CSM
AC-657
x4
STEP 1
Place the four TR3 towers at the corner to mount
the truss perimeter and stabilize the towers.
STEP 2
Place horizontally the stair-truss that you want to
raise just above the perimeter, mount the top at
the end of the stair-truss and attach it to the two
hinges from the 0,5m truss. Make the same in the
4 towers.
STEP 3
Assembly all items for the support motor as
shown in the pictures, place the electrical chain
hoist and pass the chain. Ensure the hook to the
stair-truss using a sling or similar product.
AC-654
x4
Advertisement
Related Manuals for Fenix CESM-TR3
Summary of Contents for Fenix CESM-TR3
- Page 1 Assembly all items for the support motor as shown in the pictures, place the electrical chain hoist and pass the chain. Ensure the hook to the stair-truss using a sling or similar product. SM-TR AC-654 AC-657 CESM-TR3 Lifting kit for motor support for TR3...
- Page 2 STEP 5 STEP 4 Once the tower is up, put the safety pins to Switch on the electrical chain hoist and the hinges, remove the truss along with the raise the stair-truss from horizontal to following accessories: CSM-TR, TI-CSM and vertical position.