Table of Contents
Advertisement
O
VERVIEW
Active-Semi's PAC5532EVK1 development platform is a complete hardware solution enabling users not only
to evaluate the PAC5532 device, but also develop power applications revolving around this powerful and
®
®
versatile ARM
Cortex
-M4F based microcontroller. The module contains a PAC5532 Power Application
®
Controller
(MCU) and all the necessary circuitry to properly energize the MCU and its internal peripherals
once power is applied.
To aid in the application development, the PAC5532EVK1 offers access to each and every one of the
PAC5532 device's signals by means of a series of male header connectors.
The PAC5532EVK1 also contains access to an external USB to UART module enabling users to connect the
evaluation module to a PC computer through a conventional Virtual Comm Port which can then be used in the
communication efforts by taking advantage of the PAC5532's UART interface. Graphical User Interface (GUI)
software suites can be employed to externally control particular application features.
Finally, the PAC5532EVK1 module gives access to the PAC5532's SWD and JTAG ports allowing users to
both program the application into the device's FLASH memory, as well as debug the application in real time.
The provided 4 pin connector is compatible with a decent variety of SWD based debugger/programmer
modules, widely available. In parallel, a MIPI20 connector is made available that provides SWD, JTAG and
TRACE functionality, greatly expanding the existent debugging capabilities.
Active-Semi's PAC5532EVK1 evaluation kit consists of the following:
PAC5532EVK1 evaluation module
•
PAC5532EVK1 User's Guide
•
Schematics, BOM and Layout Drawings
•
-
3
-
Rev 1.0 February 2018
Advertisement
Table of Contents
