Oven Operation - Wolf ICBCSO24TESTH Use And Care Manual

OVEN O PE R ATI O N

Oven Operation

COOKI N G M O D E S
Select Cooking Mode:
Touch .
1
Use and to select the desired cooking mode.
2
Touch .
3
Review the information on the display.
4
Touch .
5
The unit will start 20 seconds after the last key touch. To
start the mode immediately, use the arrows to select Start
Operation, then touch .
|
6 English
OPTIONS
Set Temperature:
Use and to select the desired temperature.
1
Touch .
2
Set Duration:
The oven heats immediately and turns off after the specified
duration. The oven light illuminates three minutes prior to
the end time.
If the temperature probe is used, the probe overrides the
switch-off time and turns the oven off when set temperature
is reached.
Use and to select the desired cooking duration.
1
Touch .
2
Set End:
The set end feature automatically turns the oven on and off
at specified times. The oven remains idle until the desired
start time and turns off at the desired switch-off time. The
clock must be set to the correct time for delayed start to
function properly.
If the temperature probe is used, the probe overrides the
switch-off time and turns the oven off when set temperature
is reached. If the probe temperature is not reached before
the switch-off time, it will not extend operating time.
Use and to select the desired end time.
1
Touch .
2
Set Food Probe Temp:
Use and to select the desired probe temperature.
1
Touch .
2
OV E N O P E RAT IO N
Oven Operation
Prior to use, use the test strip provided to determine the
water hardness. The oven defaults to hard water. Refer to
User Settings on page 5 to adjust water hardness.
Follow the steps below to ensure all residual oil from the
manufacturing process has been removed.
Prior to Use:
Clean the oven thoroughly with hot water and a mild
1
detergent.
Rinse and dry with a soft cloth.
2
Turn on cooking ventilation. Some smoke and odor is
3
normal.
Fill and install the water tank.
4
Select Convection Steam and adjust the temperature to
5
210°C. Heat oven (empty) for 30 minutes.
After Each Use:
Touch . For modes using steam, do not remove the
1
water tank until "WATER IS BEING PUMPED OFF" no
longer appears on the display.
Open the door to the at-rest position and allow to cool.
2
Refer to the illustration below.
Once cool, wipe the interior dry.
3
Close the door.
4
Door at-rest position