Panasonic AW-UE150WP Operating Instructions Manual page 67

Troubleshooting (continued)
Symptom
H.264 images are not
displayed
The images are distorted
When multiple web browsers
are running to display H.264
images, images from multiple
cameras appear sequentially
in a single web browser
Audio is not output for
NDI|HX-compatible switchers
Cause and solution
• If the "Network Camera View 4S" plug-in viewer software is deleted in
an environment where the "Network Camera View 3" plug-in viewer
software is installed, display of H.264 images will become impossible.
In such cases, delete "Network Camera View 3" before installing
"Network Camera View 4S".
• Is the camera connected to the personal computer via the Internet,
etc., via a router?
→ If UDP port transfer has not been set correctly, H.264 images cannot be
displayed.
H.264 can be transferred by HTTP when [Internet mode (over HTTP)] is
set to [On].
• Has UDP communication been blocked by security software or a
firewall?
→ If [Internet mode (over HTTP)] is [Off], H.264 is transferred by UDP.
• The images may be distorted if the transmission path is congested
and proper transmission is not possible.
→ Consult your network administrator.
• The images may be distorted if video packet shuffling occurs on the
transmission path.
→ Switching to an identical Internet service provider for both the camera
and the personal computer may prevent this problem. Consult your
network administrator.
For Windows:
• This may occur depending on the combination of the personal
computer's display adaptor and the driver.
→ If this occurs, update the first display adaptor to the latest version.
If this does not resolve the problem, adjust the hardware accelerator
functon as follows.
This section describes the procedure for Windows 7 as an example.
Changing the settings may not be possible, depending on your
environment.
A Right-click on the desktop, and select [Screen Resolution] from the
menu.
B Click [Advanced settings].
C Select the [Troubleshoot] tab, and click [Change setting].
D If the [User Account Control] dialog box appears, click [Yes]. (When
logged on with an account other than an administrator account,
enter the password (and user name if necessary), and click [Yes].)
E Change to [Hardware acceleration] setting to [None] at the far left,
and click [OK].
• [Audio] may be set to [Off] in the [Audio] audio setting screen.
→ Reset the setting to [On].
Operating Instructions
Reference pages
– – –
Operating Instructions (PDF)
→ "Web screen configurations"
→ "Image screen [Image/Audio]"
→ "IP video settings screen [Video over
IP]"
→ "H.264"
→ "Internet mode (over HTTP)"
– – –
– – –
– – –
Operating Instructions (PDF)
→ "Web screen configurations"
→ "Image screen [Image/Audio]"
→ "Audio setting screen [Audio]"
→ "Audio"
→ "Audio"
67