Maintenance - Scag Power Equipment SSZ Operator's Manual

INITIAL RUN, INSPECTION, AND
OPERATING INSTRUCTIONS -
CONT'D

MAINTENANCE

Free Wheeling
Cutter Blades
WARNING:
Blade is sharp! Blade at rest can cause se-
vere cuts. Rotating blade can cut fingers off.
Always lift deck using handles provided.
g
DO NOT CUT IN,
LEAVE ORIGINAL
STARTING POINT
Figure 10
THE EDGE OF BLADE SHOULD
BE AT A 30 DEG. ANGLE
Figure 11
8
Y
X
ANGLE BLADE
BACK
SC210G
30
SC211G