Page 2
Replacement products or components thereof should be ordered direct from Factory Furniture Ltd. Copyright The design copyright for the product and drawing copyright remains the sole property of Factory Furniture Ltd. General Specifications Seat (with back)
Page 3
Heavy Damage In the event of serious damage to any component, replacements should be ordered from Factory Furniture Ltd. In this event (or if the product needs to be disassembled for any reason), please contact Factory Furniture for detailed technical advice.
Page 4
400x400x400mm C20 concrete base (recommended) Pik seat 1. Install suitable foundation pads (see illustration) each with top face at ground level 2. As soon as possible after pouring concrete for pad, position seat in correct position with each frame leg centrally in its foundation pad 3.