Related Manuals for Icematic N 120 M
Summary of Contents for Icematic N 120 M
- Page 1 ELECTRONIC MODULAR CUBERS N 120 M N 200 M N 300 M N 500 M R 404 A VERSION OUR SYSTEMS COMPLY WITH EEC DIRECTIVE 73/23 - 89/336 SERVICE MANUAL Cod. 71503029/0 - 07/2000...
- Page 2 N120-200-300-500 M air/water cooled 28-29 30-31 SELF-CLEANING PROCEDURE...
- Page 3 SPECIFICATIONS MODULAR CUBER N 120 M ice making capacity ICE PRODUCTION AIR COOLED WATER COOLED Water temperature Water temperature °C 32° 21° 15° 10° °C 32° 21° 15° 10° 10° 10° 21° 21° 32° 32° 38° 38° Ice prod. per 24 h Ice prod.
- Page 4 KS 120 - Cube stacking kit N 120 M - MACHINE SPECIFICATIONS N 120 M - AS N 120 M - WS N 120 M - AS N 120 M - WS...
- Page 5 SPECIFICATIONS MODULAR CUBER N 200 M ice making capacity WATER COOLED AIR COOLED Water temperature Water temperature °C 32° 21° 15° 10° °C 32° 21° 15° 10° 10° 10° 21° 21° 32° 32° 38° 38° Ice prod. per 24 h Ice prod.
- Page 6 KS 200 - Cube stacking kit N 200 M - MACHINE SPECIFICATIONS N 200 M - AS N 200 M - WS N 200 M - AS N 200 M - WS...
- Page 7 SPECIFICATIONS MODULAR CUBER N 300 M ice making capacity WATER COOLED AIR COOLED Water temperature Water temperature °C 32° 21° 15° 10° °C 32° 21° 15° 10° 10° 10° 21° 21° 32° 32° 38° 38° Ice prod. per 24 h Ice prod.
- Page 8 KS 300 - Cube stacking kit N 300 M - MACHINE SPECIFICATIONS N 300 M - AS N 300 M - WS N 300 M - AS N 300 M - WS...
- Page 9 SPECIFICATIONS MODULAR CUBER N 500 M ice making capacity WATER COOLED AIR COOLED Water temperature Water temperature °C 32° 21° 15° 10° °C 32° 21° 15° 10° 10° 10° 21° 21° 32° 32° 38° 38° Ice prod. per 24 h Ice prod.
- Page 10 KS 500 - Cube stacking kit N 500 M - MACHINE SPECIFICATIONS N 500 M - AS N 500 M - WS N 500 M - AS N 500 M - WS...
- Page 11 The N120M stack on top of Icematic bin model I C E M AT I C D100; the N200M-N300M stack onto Icematic Model N120-N200M-N300M-N500M Modular bin model D200 while the model N500M onto Cubers. bin D310. The Models N120-N200M-N300M-N500M Modular Cubers are quality designed, engi-...
- Page 12 The ICEMATIC bins for these units are the D100, D200, and D310. N120M - AIR SEPARATOR DEFLETTORE AIR SEPARATOR STACKING INSTALLATION To stack a second machine onto the present one, first remove the top panel from the lower machine. Add a bead of food grade silicone sealant to the top edges of the lower units freezing compart- ment.
- Page 13 Then make use of the Stacking Kit KS120, KS200, KS300, KS500, to be mounted as per fitting instructions included in their package, respectively on N120M, N200M, N300M and N500M, located in the bottom for proper con- veying, of the ice cubers made by the top unit, into the storage bin.
- Page 14 I C E M AT I C KIT STACKING KS120: TO STACK 2 N120M KIT STACKING KS200: TO STACK ON THE N200M KIT STACKING KS300: TO STACK ON THE N300M KIT STACKING KS500: TO STACK 2 N500M...
- Page 17 N120-200-300M and two thermostatic expan- sion valves on model N500M.
- Page 20 N500M N500M N500M)
- Page 21 N120M A N120M W N200M A N200M W N300M A N300M W N500M A N500M W NOTE: Always check nameplate on individ- N120M N200M N300M N500M ual icemachine for special refrigerant charge before charging the refrigeration system. Such refrigerant charge is the average charge for the Modular Cubers.
- Page 22 1. Hi-pressure alarm 2. Power 3. Compressor 4. Bin full 5. Alarm 6. Reset/Cleaning PC BOARD COMPRESSOR HOT GAS AND WATER DRAIN VALVES MOTORS WATER PUMP WATER SAFETY SENSITIVITY FRESSURE ADJUSTMENT CONTROL N.C. 1 EVAP N.O. 2 EVAP FUSE N.C. AUTOMATIC N.O.
- Page 23 N500M N500M N500M)
- Page 25 cuber is a critically charged system.
- Page 26 N120-200-300M - WIRING DIAGRAM 220 V. 50 Hz. 1 ph.
- Page 27 N500M - WIRING DIAGRAM 380 V. 50 Hz. 3 ph.
- Page 30 ICEMATIC AUTHORIZED ICEMATIC SERVICE AGENCY. Pour 100 cc N120M, 200 cc on N200- 300M and 400 cc on N500M of Icematic Ice Machine Cleaner directly into the reservoir then push again the RESET BUTTON for a while. The water pump starts to operate with the fast...
- Page 31 10. Pour hot water into the storage bin to melt the cubes, and to also clean the bin drain. D100 - D200 - D310 D100 D200 D310...
-
Page 32: Wash Program
SELF-CLEANING PROCEDURE TO ENSURE CORRECT OPERATION OF THE MACHINE AND TO MAINTAIN THE WATER CIRCUIT AND COLLECTION PAN IN HYGIENIC CONDITIONS, THE MACHINE SHOULD BE WASHED WITH CITRIC ACID AT LEAST ONCE A YEAR Note: The correct dosage for one wash cycle is 100 grams of citric acid per litre of water Prepare a solution of water and citric acid, pour into the pan, and run the wash program. - Page 33 HOW TO USE THE RESET/WASH BUTTON mittent) consists of the following opera- Pressing the button n. 6 whether tions: momentarily or pressing and holding) – activation of drain solenoid valve and when the machine is in alarm mode, the pump for 30 sec. approx. machine resets and returns to normal –...
- Page 35 NEW ELECTRONIC CONTROL FOR MODULAR MACHINES SUPPLEMENTARY INSTRUCTIONS NEW FUNCTIONS IMPLEMENTED The display remains exactly as before. Pump start delay at start of cold phase: limits problem of water sub-cooling (ice Compressor start delay: A 3 minute forming in basin) delay has been introduced between com- pressor stop and subsequent re-starting Pump activated in the first stage of defrost...
- Page 36 Via del Lavoro, 9 C.P. 67 I - 31033 Castelfranco Veneto (TV) Italy Tel. (0423) 738455 - Fax (0423) 722811 E-mail: service@castelmac.it Web-site: www.castelmac.it Cod. 71503029/0 - 07/2000...