Introduction; Important Safety Information - Hoshizaki RM-10 Instruction Manual

Glass door merchandiser
Table of Contents

Advertisement

This manual contains instructions for installation, operation and general
maintenance of your unit. It also includes a Troubleshooting Chart to
diagnose problems along with corrective actions.

Important Safety Information

Throughout this manual, notices appear to bring your attention to
situations which could result in death, serious injury, damage to the
appliance, or damage to property.
WARNING Indicates a hazardous situation which could result in
death or serious injury.
NOTICE Indicates a situation which could result in damage to the appliance
or property.
IMPORTANT Indicates important information about the use and care of
the appliance.
This appliance should be destined only to the use for which it has been
expressly conceived. Any other use should be considered improper and
therefore dangerous. The manufacturer cannot be held responsible for injury
or damage resulting from improper, incorrect, and unreasonable use. Failure
to install, operate, and maintain the appliance in accordance with this manual
will adversely affect safety, performance, component life, and warranty
coverage.
To reduce the risk of death, electric shock, serious injury, or fire, follow basic
precautions including the following:
Only qualified service technicians should install and service this appliance.
This appliance must be installed in accordance with applicable national,
state, and local codes and regulations.
To reduce the risk of electric shock, do not touch the power switch or plug
with damp hands.
This appliance requires an independent power supply of proper
capacity. See the nameplate for electrical specifications. Failure to use
an independent power supply of proper capacity can result in a tripped
breaker, blown fuse, damage to existing wiring, or component failure.
This could lead to heat generation or fire.

INTRODUCTION

WARNING
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm-49Rm-26

Table of Contents