Start Up The Cooler; Use Of Your Cooler With Carel Electronic Thermostat - Hoshizaki RM-10 Instruction Manual

Glass door merchandiser

Hide thumbs

Table Of Contents

Table of Contents

1. Plug in the electrical cord of the unit to a wall outlet, following the

recommendations about electrical installation in this manual.

2. Let the cooler run with no product load for 2 hours, or let the

compressor complete three on/off cycles to assure that the

temperature inside is appropriate for the products before loading

them into the refrigerator.

3. Verify the internal illumination operation by activating the on and off

switch.

4. When placing products in the cooler, you should leave small gaps

between one and the other to assure free circulation of air inside the

cabinet.

5. Do not leave the door open for extended periods of time, to avoid

increased temperature of the products.

6. Do not unplug your cooler during the night, since when you turn it

back on during the day the electrical consumption will increase.

The temperature of a cooler should be between 34°F to 40°F.

USE OF YOUR COOLER WITH CAREL

These coolers are provided with a versatile electronic thermostat that

allows to cool different beverages.

This controller has a feature to reduce energy consumption during the

closing hours of your locale. To activate this feature press the ES button

on the controller. In this refrigerator, the Energy Saving mode has been

programmed to turn off the lights for one hour, or until the door is opened.

The Energy Saving mode can also be deactivated by pressing the ES button,

which will turn the lights back on.