ABB C300 Operating Manual page 34

...8 PROFILE OPERATION
...8.2 Profile States Page
SKIP
SG 02
SELF
tUNE
32
Skip Segment
This frame is omitted if a logic input has been assigned to
the Skip Current Segment function, i.e.
selected, see Section 4.10 in the Programming Guide.
A segment may be skipped by pressing the
When the
abandons the current segment and executes the next
segment.
Normally, the Current Segment number is displayed on the
lower display.
C–dn
which can also be skipped if required. If the segment
Delay
being skipped is the last segment then
Press the
Return to top of
Programming Guide.
ContrL
or
PAGE
switch is pressed the profile immediately
is displayed during a countdown time – see
switch to skip the next segment.
Profile States Page
has been
P-SKIP
switch.
Time
is displayed.
ENd
or advance to the