Front & Back Cover-Copying Or Adding Front And Back Covers - Savin SDC410 Operating Instructions Manual

When you use Front Cover mode with 2 Sided
1
Enter 2 Sided 1 Sided or 2 Sided 2 Sided
mode. See page 70 or 74.
2
Follow the steps 1 to 2 on page 82.
3
Select [Image] or [Blank] key depending on the
reverse side of first original has an image or not.
4
Press the [OK] key.
5
Set your originals in the document feeder, then
press the Start key.
Front & Back Cover—Copying or Adding Front and Back Covers
The optional document feeder is required to use this function.
<Back Cover: Copy>
B
A
C
Note
You can specify whether to make a copy on a front cover sheet. If you select [Copy], the last pages will be copied on
the back cover sheets. If you select [Blank], a cover sheet will just be inserted after the last copy.
The cover sheets should be identical in size and direction to the copy paper.
The cover sheets should be fed from the bypass tray.
The covers are copied in Thick mode.
If Blank Cover mode is selected, the back cover will not be counted as a copy.
Reference
For functions that cannot be used together with this function,
B
A
C
GCHYOS3E
Cover Sheet—Adding or Inserting Sheets
1 Sided or 2 Sided
<Back Cover: Blank>
see page 106.
2 Sided mode
83