Program-Storing And Recalling Your Copy Settings In Memory - Savin SDC410 Operating Instructions Manual

Program—Storing and Recalling Your Copy Settings in Memory
You can store up to five frequently used copy job settings in machine memory and recall them for future use.
Note
If you want to change the stored programs, store another program again.
Storing Your Settings
1
Set the copy settings you want to put into
memory.
2
Press the Program key.
3
Press the [Program] key.
4
Select the program number you want to store
the settings in.
Note
If this program number is already being used, the
machine asks whether you wish to overwrite it or not.
Press the [Yes] or [No] key.
Recalling Your Settings
1
Press the Program key.
2
Press the [Recall] key.
Basic Operation
57