Common Problems
Power supply LED does not light up
Battery has no power
Try again after charging battery for half an hour or longer.
Incorrect battery installation
Battery is installed in the incorrect postion. Re-install
the battery correctly and confirm that battery is installed
properly.
Static electricity causing abnormality
Static electricity may cause an abnormal shutdown. Remove
the battery to reinstall.
Fail to take off
Power supply is insufficient
After successful connection to the application, you may
check the power supply level in the control interface. If power
supply is less than 20%, please charge the battery.
Protective cover is not removed
Protective cover must be removed for Aircraft mode.
Protective cover is only applicable for using Hovercraft mode.
Power module is installed in the wrong direction
Check all power modules; the foot pad side must be facing
downwards.
31