Saturn 2004 L-Series Owner's Manual page 289

CAUTION:
{
Fans or other moving engine parts can injure
you badly. Keep your hands away from moving
parts once the engine is running.
5. Check that the jumper cables do not have loose or
missing insulation. If they do, you could get a
shock. The vehicles could be damaged, too.
Before you connect the cables, here are some
basic things you should know. Positive (+) will go to
positive (+) or to a remote positive (+) terminal if
the vehicle has one. Negative ( ) will go to a heavy,
unpainted metal engine part or to a remote
negative ( ) terminal if the vehicle has one.
Do not connect positive (+) to negative ( ) or you
will get a short that would damage the battery
and maybe other parts, too. And do not connect the
negative ( ) cable to the negative ( ) terminal on
the dead battery because this can cause sparks.
6. Remove the terminal cover and connect the red
positive (+) cable to the positive (+) terminal of
the dead battery. Use a remote positive (+) terminal
if the vehicle has one. The positive (+) terminal
on your vehicle is covered by a red protector cap
which must be removed before you connect
the positive (+) jumper cable to the positive (+)
terminal of the dead battery.
5-43