Table of Contents
Advertisement
Using several HeliaLux SmartControls in a home network
Please ensure that you are connected to the home network. Please refer to ' HeliaLux SmartControl in home networks ' to this end.
Alternative 1: Accessing the individual SmartControls through
individual IP addresses
Each HeliaLux SmartControl can be manually assigned an individual IP address. Please refer to 'Assigning static IP addresses in home
networks' to this end.
You will be able to access the individual SmartControls once you've configured your home network to support manually assigned IP
addresses by entering the assigned IP addresses into your Internet browser's address bar.
Example:
You have changed the HeliaLux SmartControl's IP address from 192.168.4.1 to your desired IP address, e.g.: 192.168.1.35.
You can then access your device by entering the newly assigned IP address in your Internet browser's address bar.
Save the IP addresses for the respective HeliaLux SmartControl as favourites in your end device. This will help you access the user
interface more quickly and more comfortably.
Alternative 2: Your home network supports name resolution
Assign a unique network name (SSID) to each device if you intend to use several HeliaLux SmartControls in a single home network.
Please refer to 'Changing the network name (SSID) and password' if you want to change the network name (SSID). Do not disable the
'Connect to home network' sliding controller in this case!
You will be able to access the individual SmartControls by entering the assigned SSID in your Internet browser's address bar if your home
network supports name resolution.
Example:
You have changed the network name (SSID) from 'HLSmartControl' to 'Controller1' for example. You will then be able to access your
controller by entering the newly assigned SSID: "http://Controller1" in your Internet browser's address bar.
Notice
Network names (SSID) may not contain spaces or umlauts.
19
Hide quick links:
Advertisement
Table of Contents
