Table of Contents
Advertisement
Assigning a static IP address in your home network
Please proceed as follows if you want to be able to launch the HeliaLux
SmartControl using a static IP address that you have assigned:
Attention
Only for experienced users. We recommend that only experienced users make changes
to the IP settings. We otherwise recommend use in DHCP mode.
1. Establish the connection to the HeliaLux SmartControl's user interface (please refer to
'Connecting the HeliaLux SmartControl to home networks').
2. Select the main ' Settings ' menu item.
3. Navigate to the 'Home network ' item.
4. Disable the checkbox for DHCP mode.
Info
Disable DHCP mode to assign your own IP address to the HeliaLux SmartControl by which
it can be accessed. Your router must support the manual assignment of a separate IP
address. Please refer to your router's user manual for more information in this regard.
5. Assign the desired IP address.
6. Confirm your choice and input by clicking the ' Save ' button. Your device will reboot and
will then be accessible via the new IP address.
Using several HeliaLux SmartControls in a single household
We recommend that you change your device's SSID (network name) / the IP address when several HeliaLux SmartControls are used in a
single household, This will ensure that each device is assigned a unique name / a unique IP address in the network and that it is
individually accessible.
Info
Configure your individual HeliaLux SmartControls in sequence. Please ensure that only one device is in operation during configuration.
Using several HeliaLux SmartControls in Access Point Mode
An individual network name (SSID) must be assigned to each individual device if you want to use several HeliaLux SmartControls in
Access Point Mode.
Please refer to 'Changing the network name (SSID) and password' to this end.
18
Hide quick links:
Advertisement
Table of Contents
