ELECTRONIC DIRECTORY Rolodex File Operating Manual page 11

For example:
Press the ERASE key to delete the character at the
blinking cursor location. If a blank space appears
on the blinking cursor, the character to the left of the
cursor will be erased.
3. Continue to press the ERASE key to backspace and
delete unwanted characters.
To selectively erase characters, press the REV/FWD
key to move the cursor left and right. Position the cur-
sor at the character to be changed or erased, then
press the ERASE key.
4. Type new data if desired.
5. Press the DOWN arrow key to move the cursor down a
line. Pressing the UP or DOWN arrow keys will move
the cursor to the last character of the previous or next
line of the display screen.
NOTE: You may encounter an INVALID FILE message
when editing a file that has been transferred from a 64K
Electronic Rolodex File to the 128K unit . The 64K unit
places the telephone number and fax number of a file on
one line instead of two. An empty space is sometimes
created before the second number when it is placed on
two lines in the 128K unit. The empty character space at
the beginning of a line must be removed before any infor-
mation in the file can be edited and saved. Leaving the
empty space will prevent you from changing the file.
6
SCOTT R. CARRINGTON
DUMONT CORP.
TEL# 1-201-555-3032
FAX# 1-201-555-3000
7000 PARKSIDE DR.
SECAUCUS, NJ 07094-2196
RECALL