Operating The Radio; Specifications - Sony Dream Machine ICF-C1iPMK2 Operating Instructions

Fm/am clock radio

Hide thumbs Also See for Dream Machine ICF-C1iPMK2:

User manual

Operating instructions (2 pages)

Specifications (2 pages)

page of 2

/ 2
Bookmarks

Notes

Setting the clock

Notes

Setting the clock

• The connector of the unit is for sole use for iPod.

Notes

Setting the clock

Notes

• The connector of the unit is for sole use for iPod.

Setting the clock

Notes

• The connector of the unit is for sole use for iPod.

Setting the clock

When you use the devices do not match with the

Setting the clock

• The connector of the unit is for sole use for iPod.

When you use the devices do not match with the

and date

• The connector of the unit is for sole use for iPod.

When you use the devices do not match with the

connector, connect it to the AUDIO IN terminal of

and date

When you use the devices do not match with the

connector, connect it to the AUDIO IN terminal of

and date

connector, connect it to the AUDIO IN terminal of

When you use the devices do not match with the

and date

connector, connect it to the AUDIO IN terminal of

this unit with the supplied audio connecting cable.

and date

this unit with the supplied audio connecting cable.

connector, connect it to the AUDIO IN terminal of

this unit with the supplied audio connecting cable.

Set the clock and date according to the following

• Sony cannot accept responsibility in the event that

this unit with the supplied audio connecting cable.

Set the clock and date according to the following

• Sony cannot accept responsibility in the event that

steps.

this unit with the supplied audio connecting cable.

Set the clock and date according to the following

• Sony cannot accept responsibility in the event that

steps.

Set the clock and date according to the following

data recorded to iPod is lost or damaged when using

• Sony cannot accept responsibility in the event that

steps.

Set the clock and date according to the following

• Sony cannot accept responsibility in the event that

data recorded to iPod is lost or damaged when using

steps.

• Sony cannot accept responsibility in the event that

data recorded to iPod is lost or damaged when using

steps.

an iPod connected to this unit.

data recorded to iPod is lost or damaged when using

steps.

an iPod connected to this unit.

data recorded to iPod is lost or damaged when using

Plug in the unit.

an iPod connected to this unit.

data recorded to iPod is lost or damaged when using

Plug in the unit.

an iPod connected to this unit.

Plug in the unit.

an iPod connected to this unit.

Plug in the unit.

The display will flash "AM 12:00" or "0:00".

Plug in the unit.

The display will flash "AM 12:00" or "0:00".

Plug in the unit.

Put the iPod into the unit's connector.

The display will flash "AM 12:00" or "0:00".

Put the iPod into the unit's connector.

Press CLOCK for more than 2 seconds.

The display will flash "AM 12:00" or "0:00".

Put the iPod into the unit's connector.

Press CLOCK for more than 2 seconds.

The display will flash "AM 12:00" or "0:00".

Press CLOCK for more than 2 seconds.

The display will flash "AM 12:00" or "0:00".

Put the iPod into the unit's connector.

Press CLOCK for more than 2 seconds.

Put the iPod into the unit's connector.

The year will start to flash in the display.

Press CLOCK for more than 2 seconds.

The year will start to flash in the display.

Press TIME SET + or – until the correct

The year will start to flash in the display.

Press TIME SET + or – until the correct

The year will start to flash in the display.

Press TIME SET + or – until the correct

year appears in the display.

Press TIME SET + or – until the correct

year appears in the display.

Press TIME SET + or – until the correct

year appears in the display.

Press CLOCK.

year appears in the display.

Press CLOCK.

year appears in the display.

Press CLOCK.

Repeat steps 3 and 4 to set the month, day

Press CLOCK.

Repeat steps 3 and 4 to set the month, day

Press CLOCK.

Repeat steps 3 and 4 to set the month, day

and time.

Repeat steps 3 and 4 to set the month, day

and time.

Repeat steps 3 and 4 to set the month, day

and time.

After setting the minute the clock starts from

and time.

After setting the minute the clock starts from

and time.

After setting the minute the clock starts from

0 seconds. But if you do not set "Minute", the

After setting the minute the clock starts from

0 seconds. But if you do not set "Minute", the

After setting the minute the clock starts from

0 seconds. But if you do not set "Minute", the

clock does not start from 0 second flat.

0 seconds. But if you do not set "Minute", the

clock does not start from 0 second flat.

0 seconds. But if you do not set "Minute", the

clock does not start from 0 second flat.

• Pressing and holding + or – changes the year,

clock does not start from 0 second flat.

• Pressing and holding + or – changes the year,

month, day or time rapidly.

• Pressing and holding + or – changes the year,

month, day or time rapidly.

• Pressing and holding + or – changes the year,

month, day or time rapidly.

• While setting the clock, you must perform each step

month, day or time rapidly.

• While setting the clock, you must perform each step

month, day or time rapidly.

• While setting the clock, you must perform each step

within about 65 seconds, or the clock setting mode

• While setting the clock, you must perform each step

within about 65 seconds, or the clock setting mode

• While setting the clock, you must perform each step

within about 65 seconds, or the clock setting mode

will be cancelled.

within about 65 seconds, or the clock setting mode

will be cancelled.

within about 65 seconds, or the clock setting mode

will be cancelled.

• The clock system varies depending on the model

will be cancelled.

• The clock system varies depending on the model

Adjust the rear support forward or backward

• The clock system varies depending on the model

will be cancelled.

Adjust the rear support forward or backward

you own.

Adjust the rear support forward or backward

• The clock system varies depending on the model

you own.

checking the back of the iPod fits snugly against

Adjust the rear support forward or backward

you own.

• The clock system varies depending on the model

checking the back of the iPod fits snugly against

Adjust the rear support forward or backward

12-hour system: "AM 12:00" = midnight

you own.

checking the back of the iPod fits snugly against

Adjust the rear support forward or backward

you own.

12-hour system: "AM 12:00" = midnight

checking the back of the iPod fits snugly against

the rear support to protect the connector.

you own.

checking the back of the iPod fits snugly against

the rear support to protect the connector.

24-hour system: "0:00" = midnight

12-hour system: "AM 12:00" = midnight

the rear support to protect the connector.

checking the back of the iPod fits snugly against

24-hour system: "0:00" = midnight

12-hour system: "AM 12:00" = midnight

24-hour system: "0:00" = midnight

the rear support to protect the connector.

12-hour system: "AM 12:00" = midnight

the rear support to protect the connector.

24-hour system: "0:00" = midnight

the rear support to protect the connector.

24-hour system: "0:00" = midnight

To display the year and date

Press CLOCK once for the date, and within

about 5 seconds press it again for the year.

Press CLOCK once for the date, and within

about 5 seconds press it again for the year.

The display shows the date or year for about

about 5 seconds press it again for the year.

The display shows the date or year for about

about 5 seconds press it again for the year.

The display shows the date or year for about

5 seconds and then changes back to the current time.

The display shows the date or year for about

5 seconds and then changes back to the current time.

The display shows the date or year for about

5 seconds and then changes back to the current time.

To change the display to

the summer time (daylight

To change the display to

the summer time (daylight

saving time) indication

the summer time (daylight

saving time) indication

Press SUMMER TIME.

Press CLOCK and SUMMER TIME/ALARM DISPLAY

saving time) indication

Press SUMMER TIME.

for more than 2 seconds.

SUMMER TIME indicator appears in the display and

Press SUMMER TIME.

SUMMER TIME indicator appears in the display and

Press SUMMER TIME.

the time indication changes to the summer time

SUMMER TIME indicator appears in the display and

the time indication changes to the summer time

SUMMER TIME indicator appears in the display and

the time indication changes to the summer time

SUMMER TIME indicator appears in the display and

(daylight saving time).

the time indication changes to the summer time

(daylight saving time).

the time indication changes to the summer time

(daylight saving time).

the time indication changes to the summer time

To deactivate the summer time (daylight saving time)

(daylight saving time).

To deactivate the summer time (daylight saving time)

(daylight saving time).

To deactivate the summer time (daylight saving time)

(daylight saving time).

adjustment, press SUMMER TIME again.

To deactivate the summer time (daylight saving time)

adjustment, press SUMMER TIME again.

To deactivate the summer time (daylight saving time)

adjustment, press SUMMER TIME again.

To deactivate the summer time (daylight saving time)

adjustment, press SUMMER TIME again.

adjustment, press CLOCK and SUMMER TIME/

adjustment, press SUMMER TIME again.

ALARM DISPLAY for more than 2 seconds again.

Setting the brightness

of the display

Three levels of brightness are available by

pressing SNOOZE/BRIGHTNESS.

Three levels of brightness are available by

pressing SNOOZE/BRIGHTNESS.

Three levels of brightness are available by

pressing SNOOZE/BRIGHTNESS.

High (default) t Middle t Low

Press N/X.

The iPod begins to play automatically.

Press N/X.

Operating the iPod

The iPod begins to play automatically.

Operating the iPod

You can operate the connected iPod by the unit or

Operating the iPod

The iPod begins to play automatically.

You can operate the connected iPod by the unit or

Operating the iPod

The iPod begins to play automatically.

You can operate the connected iPod by the unit or

Operating the iPod

You can operate the connected iPod by the unit or

iPod buttons.

Operating the iPod

You can operate the connected iPod by the unit or

iPod buttons.

You can operate the connected iPod by the unit or

iPod buttons.

You can enjoy iPod audio by connecting this unit. To

iPod buttons.

You can enjoy iPod audio by connecting this unit. To

iPod buttons.

use an iPod, refer to the user's guide of your iPod.

You can enjoy iPod audio by connecting this unit. To

use an iPod, refer to the user's guide of your iPod.

You can enjoy iPod audio by connecting this unit. To

use an iPod, refer to the user's guide of your iPod.

Turn off the iPod

use an iPod, refer to the user's guide of your iPod.

Compatible iPod models

Turn off the iPod

Compatible iPod models

Turn off the iPod

Compatible iPod models

Turn off the iPod

Pause playback

Compatible iPod models

Pause playback

Turn off the iPod

Compatible iPod models

Pause playback

Compatible iPod models

The compatible iPod models are as follows. Update

Pause playback

The compatible iPod models are as follows. Update

Pause playback

The compatible iPod models are as follows. Update

Pause playback

your iPod to use the latest software before you use it.

The compatible iPod models are as follows. Update

your iPod to use the latest software before you use it.

The compatible iPod models are as follows. Update

Go to the next

your iPod to use the latest software before you use it.

The compatible iPod models are as follows. Update

Go to the next

your iPod to use the latest software before you use it.

Go to the next

your iPod to use the latest software before you use it.

track

your iPod to use the latest software before you use it.

Go to the next

track

Go to the next

track

Go back to the

track

Go back to the

track

Go back to the

previous track

Go back to the

previous track

Go back to the

previous track

Go back to the

previous track

Locate a point

previous track

Locate a point

while listening to

Locate a point

while listening to

Locate a point

while listening to

Locate a point

the sound

while listening to

the sound

iPod nano

the sound

while listening to

iPod nano

the sound

5th generation

Locate a point

iPod nano

Locate a point

5th generation

the sound

iPod nano

5th generation

Locate a point

iPod nano

iPhone 3GS

iPod touch

(video camera)

while observing

5th generation

iPhone 3GS

iPod touch

Locate a point

(video camera)

while observing

5th generation

iPhone 3GS

iPod touch

Locate a point

(video camera)

2nd generation

Locate a point

while observing

5th generation

iPhone 3GS

2nd generation

iPod touch

the display

(video camera)

iPhone 3GS

iPod touch

while observing

(video camera)

2nd generation

the display

while observing

iPhone 3GS

iPod touch

(video camera)

the display

while observing

2nd generation

the display

2nd generation

Go back to the

the display

Go back to the

the display

Go back to the

previous menu

Go back to the

previous menu

Go back to the

previous menu

Go back to the

previous menu

Select a menu

previous menu

Select a menu

item or a track

Select a menu

item or a track

Select a menu

for playback

item or a track

for playback

item or a track

for playback

Execute the

iPod nano

for playback

Execute the

iPod nano

Execute the

iPod nano

Execute the

selected menu or

4th generation

selected menu or

Execute the

4th generation

iPod nano

selected menu or

Execute the

4th generation

iPhone 3G

iPod touch

iPod nano

(video)

the playback

selected menu or

iPhone 3G

iPod touch

4th generation

(video)

selected menu or

the playback

4th generation

iPhone 3G

iPod touch

selected menu or

the playback

(video)

1st generation

4th generation

iPhone 3G

iPod touch

1st generation

the playback

(video)

iPhone 3G

iPod touch

(video)

1st generation

the playback

iPhone 3G

iPod touch

* These operations are available only when using the

the playback

(video)

* These operations are available only when using the

1st generation

* These operations are available only when using the

1st generation

supplied remote commander.

* These operations are available only when using the

supplied remote commander.

* These operations are available only when using the

supplied remote commander.

Notes

• When placing or removing the iPod, keep it straight

Notes

• When placing or removing the iPod, keep it straight

Notes

• When placing or removing the iPod, keep it straight

and parallel with the rear support.

• When placing or removing the iPod, keep it straight

and parallel with the rear support.

• When placing or removing the iPod, keep it straight

iPod nano

• When placing or removing the iPod, keep it straight

and parallel with the rear support.

iPod nano

• Do not carry the unit with an iPod set on the

and parallel with the rear support.

iPod nano

• Do not carry the unit with an iPod set on the

and parallel with the rear support.

3rd generation

and parallel with the rear support.

iPod nano

• Do not carry the unit with an iPod set on the

3rd generation

iPod nano

connector. Doing so may cause a malfunction.

3rd generation

• Do not carry the unit with an iPod set on the

iPod nano

connector. Doing so may cause a malfunction.

(video)

• Do not carry the unit with an iPod set on the

3rd generation

(video)

• Do not carry the unit with an iPod set on the

connector. Doing so may cause a malfunction.

3rd generation

(video)

iPod classic

3rd generation

connector. Doing so may cause a malfunction.

iPod classic

iPhone

• When placing or removing the iPod, brace the unit

(video)

connector. Doing so may cause a malfunction.

iPod classic

iPhone

• When placing or removing the iPod, brace the unit

(video)

connector. Doing so may cause a malfunction.

• When placing or removing the iPod, brace the unit

iPhone

(video)

iPod classic

• When placing or removing the iPod, brace the unit

with one hand and take care not to press the controls

iPhone

• When placing or removing the iPod, brace the unit

with one hand and take care not to press the controls

iPod classic

• When placing or removing the iPod, brace the unit

with one hand and take care not to press the controls

iPhone

of the iPod by mistake.

with one hand and take care not to press the controls

of the iPod by mistake.

with one hand and take care not to press the controls

of the iPod by mistake.

• Do not pull on the rear support strongly as it cannot

of the iPod by mistake.

• Do not pull on the rear support strongly as it cannot

of the iPod by mistake.

• Do not pull on the rear support strongly as it cannot

be detached from the unit and may cause a

• Do not pull on the rear support strongly as it cannot

be detached from the unit and may cause a

• Do not pull on the rear support strongly as it cannot

malfunction.

be detached from the unit and may cause a

malfunction.

be detached from the unit and may cause a

• To use an iPod, refer to the user's guide of your

malfunction.

• To use an iPod, refer to the user's guide of your

malfunction.

• To use an iPod, refer to the user's guide of your

iPod.

• To use an iPod, refer to the user's guide of your

iPod.

iPod nano

• To use an iPod, refer to the user's guide of your

iPod.

iPod nano

• Before disconnecting the iPod, pause playback.

iPod.

iPod nano

iPod.

2nd generation

iPod

• Before disconnecting the iPod, pause playback.

1st generation

2nd generation

iPod nano

iPod

iPod nano

iPod.

iPod nano

1st generation

• Before disconnecting the iPod, pause playback.

iPod nano

2nd generation

iPod

1st generation

(aluminum)

iPod nano

5th generation

iPod nano

• Before disconnecting the iPod, pause playback.

2nd generation

(aluminum)

5th generation

iPod

1st generation

2nd generation

iPod

1st generation

• Before disconnecting the iPod, pause playback.

(aluminum)

5th generation

2nd generation

iPod

Tip

(video)

1st generation

(aluminum)

5th generation

Tip

(aluminum)

(video)

5th generation

Tip

(video)

(aluminum)

5th generation

Apple's iPod Universal Dock Adapter can be used

(video)

Tip

Apple's iPod Universal Dock Adapter can be used

(video)

Apple's iPod Universal Dock Adapter can be used

Tip

with this unit.

Apple's iPod Universal Dock Adapter can be used

with this unit.

Apple's iPod Universal Dock Adapter can be used

with this unit.

Apple's iPod Universal Dock Adapter can be used

with this unit.

To use the unit as a battery

charger

To use the unit as a battery

charger

You can use the unit as a battery charger.

charger

You can use the unit as a battery charger.

The charging begins when the iPod is placed on the

iPod mini

You can use the unit as a battery charger.

The charging begins when the iPod is placed on the

You can use the unit as a battery charger.

iPod mini

The charging begins when the iPod is placed on the

You can use the unit as a battery charger.

iPod

iPod mini

connector.

iPod

The charging begins when the iPod is placed on the

iPod mini

The charging begins when the iPod is placed on the

connector.

iPod mini

iPod

4th generation

The charging begins when the iPod is placed on the

connector.

iPod mini

4th generation

iPod

4th generation

iPod

The charging status appears in the iPod display. For

connector.

iPod

connector.

The charging status appears in the iPod display. For

4th generation

iPod

(color display)

connector.

The charging status appears in the iPod display. For

4th generation

(color display)

details, see the user's guide of your iPod.

4th generation

The charging status appears in the iPod display. For

(color display)

details, see the user's guide of your iPod.

The charging status appears in the iPod display. For

4th generation

(color display)

The charging status appears in the iPod display. For

details, see the user's guide of your iPod.

(color display)

details, see the user's guide of your iPod.

(color display)

details, see the user's guide of your iPod.

On copyrights

• iPod is a trademark of Apple Inc., registered in the

On copyrights

• iPod is a trademark of Apple Inc., registered in the

U.S. and other countries.

• iPod is a trademark of Apple Inc., registered in the

U.S. and other countries.

• iPhone is a trademark of Apple Inc.

U.S. and other countries.

• iPhone is a trademark of Apple Inc.

U.S. and other countries.

• iPhone is a trademark of Apple Inc.

• All other trademarks and registered trademarks are

• iPhone is a trademark of Apple Inc.

• All other trademarks and registered trademarks are

• iPhone is a trademark of Apple Inc.

of their respective holders. In this manual, ™ and ®

• All other trademarks and registered trademarks are

of their respective holders. In this manual, ™ and ®

• All other trademarks and registered trademarks are

marks are not specified.

of their respective holders. In this manual, ™ and ®

marks are not specified.

of their respective holders. In this manual, ™ and ®

marks are not specified.

of their respective holders. In this manual, ™ and ®

marks are not specified.

Operating the radio

—Manual tuning

Press RADIO ON to turn on the radio.

The display shows the band and frequency.

Press RADIO ON to turn on the radio.

The display shows the band and frequency.

Press RADIO ON to turn on the radio.

The display shows the band and frequency.

Press RADIO ON repeatedly to select the

desired band.

Press RADIO ON repeatedly to select the

desired band.

Press RADIO ON repeatedly to select the

desired band.

Each press changes the band as follows:

desired band.

Each press changes the band as follows:

desired band.

Each press changes the band as follows:

FM1

FM2

Each press changes the band as follows:

FM1

FM2

FM1

FM2

FM1

FM2

FM1

FM2

FM1

FM2

FM1 and FM2 are the same frequency bands.

Use TUNING + or – to tune into the

FM1 and FM2 are the same frequency bands.

Use TUNING + or – to tune into the

desired station.

Use TUNING + or – to tune into the

desired station.

The FM frequency advances or reverses in

desired station.

The FM frequency advances or reverses in

desired station.

The FM frequency advances or reverses in

0.05 MHz channel steps and the AM frequency in

The FM frequency advances or reverses in

0.05 MHz channel steps and the AM frequency in

The FM frequency advances or reverses in

0.05 MHz channel steps and the AM frequency in

9 kHz channel steps.

0.05 MHz channel steps and the AM frequency in

9 kHz channel steps.

Adjust volume using VOLUME.

9 kHz channel steps.

Adjust volume using VOLUME.

To turn off the radio, press OFF.

Improving the

reception

FM:

Extend the FM wire aerial fully to

FM:

Extend the FM wire aerial fully to

FM:

Extend the FM wire aerial fully to

increase reception sensitivity.

FM:

Extend the FM wire aerial fully to

FM:

increase reception sensitivity.

Extend the FM wire aerial fully to

FM:

increase reception sensitivity.

Extend the FM wire aerial fully to

AM:

Connect the supplied AM loop aerial to

increase reception sensitivity.

AM:

Connect the supplied AM loop aerial to

increase reception sensitivity.

AM:

Connect the supplied AM loop aerial to

increase reception sensitivity.

the unit. Rotate the aerial horizontally for

AM:

Connect the supplied AM loop aerial to

AM:

the unit. Rotate the aerial horizontally for

Connect the supplied AM loop aerial to

AM:

Connect the supplied AM loop aerial to

the unit. Rotate the aerial horizontally for

optimum reception.

the unit. Rotate the aerial horizontally for

optimum reception.

the unit. Rotate the aerial horizontally for

optimum reception.

Keep away digital music player or mobile phone from

optimum reception.

Keep away digital music player or mobile phone from

the AM loop aerial or the FM wire aerial, as this may

Keep away digital music player or mobile phone from

the AM loop aerial or the FM wire aerial, as this may

Keep away digital music player or mobile phone from

the AM loop aerial or the FM wire aerial, as this may

lead to interference of reception.

the AM loop aerial or the FM wire aerial, as this may

lead to interference of reception.

the AM loop aerial or the FM wire aerial, as this may

lead to interference of reception.

Note

When you are listening to the radio with an iPhone

Note

When you are listening to the radio with an iPhone

Note

When you are listening to the radio with an iPhone

connected to the unit, interference with radio

When you are listening to the radio with an iPhone

connected to the unit, interference with radio

When you are listening to the radio with an iPhone

reception may occur.

connected to the unit, interference with radio

reception may occur.

connected to the unit, interference with radio

reception may occur.

connected to the unit, interference with radio

reception may occur.

Tip

If the FM broadcast is noisy, press

Tip

If the FM broadcast is noisy, press

Tip

If the FM broadcast is noisy, press

the remote commander to turn off "STEREO" in the

If the FM broadcast is noisy, press

the remote commander to turn off "STEREO" in the

If the FM broadcast is noisy, press

display. The radio becomes clearer although the sound

the remote commander to turn off "STEREO" in the

display. The radio becomes clearer although the sound

the remote commander to turn off "STEREO" in the

display. The radio becomes clearer although the sound

the remote commander to turn off "STEREO" in the

becomes monaural.

display. The radio becomes clearer although the sound

becomes monaural.

display. The radio becomes clearer although the sound

becomes monaural.

display. The radio becomes clearer although the sound

becomes monaural.

Presetting your

Press

Presetting your

Press

Presetting your

Press

Presetting your

Press

Presetting your

Press

OFF, or press and hold N/X

Presetting your

Press

OFF, or press and hold N/X

favourite station

OFF, or press and hold N/X

favourite station

OFF, or press and hold N/X

favourite station

OFF, or press and hold N/X

N/X

OFF, or press and hold N/X

favourite station

N/X

favourite station

N/X

favourite station

To resume play, press it again.

N/X

—Preset tuning

N/X

To resume play, press it again.

—Preset tuning

N/X

To resume play, press it again.

—Preset tuning

To resume play, press it again.

—Preset tuning

To resume play, press it again.

—Preset tuning

You can preset up to 10 stations in FM (5 stations in

FM1, 5 stations in FM2), and 5 stations in AM.

You can preset up to 10 stations in FM (5 stations in

FM1, 5 stations in FM2), and 5 stations in AM.

You can preset up to 10 stations in FM (5 stations in

FM1, 5 stations in FM2), and 5 stations in AM.

You can preset up to 10 stations in FM (5 stations in

FM1, 5 stations in FM2), and 5 stations in AM.

Presetting a station

> (forward) or .

Presetting a station

> (forward) or .

Presetting a station

> (forward) or .

Presetting a station

> (forward) or .

(backward) while playing and

Follow steps 1 to 4 in "Operating the

> (forward) or .

(backward) while playing and

Follow steps 1 to 4 in "Operating the

(backward) while playing and

> (forward) or .

Follow steps 1 to 4 in "Operating the

hold it until you find the point.

(backward) while playing and

Follow steps 1 to 4 in "Operating the

hold it until you find the point.

(backward) while playing and

Follow steps 1 to 4 in "Operating the

Radio" and manually tune into the station

hold it until you find the point.

(backward) while playing and

Radio" and manually tune into the station

Follow steps 1 to 4 in "Operating the

hold it until you find the point.

Radio" and manually tune into the station

> (forward) or .

hold it until you find the point.

> (forward) or .

Radio" and manually tune into the station

hold it until you find the point.

Radio" and manually tune into the station

you wish to preset.

> (forward) or .

you wish to preset.

Radio" and manually tune into the station

(backward) in pause and hold it

you wish to preset.

> (forward) or .

(backward) in pause and hold it

> (forward) or .

you wish to preset.

(backward) in pause and hold it

> (forward) or .

you wish to preset.

until you find the point.

Press and hold the desired PRESET

(backward) in pause and hold it

you wish to preset.

until you find the point.

Press and hold the desired PRESET

(backward) in pause and hold it

until you find the point.

(backward) in pause and hold it

Press and hold the desired PRESET

until you find the point.

Press and hold the desired PRESET

TUNING button for more than two

Press and hold the desired PRESET

MENU*

until you find the point.

TUNING button for more than two

until you find the point.

MENU*

Press and hold the desired PRESET

MENU*

TUNING button for more than two

MENU*

seconds for registration.

TUNING button for more than two

MENU*

seconds for registration.

TUNING button for more than two

MENU*

seconds for registration.

R/r*

After the preset has finished, the preset number

R/r*

seconds for registration.

After the preset has finished, the preset number

seconds for registration.

R/r*

After the preset has finished, the preset number

R/r*

After the preset has finished, the preset number

appears on the display.

R/r*

appears on the display.

After the preset has finished, the preset number

R/r*

appears on the display.

After the preset has finished, the preset number

appears on the display.

Example: To preset AM 1 260 kHz onto preset

appears on the display.

Example: To preset AM 1 260 kHz onto preset

ENTER*

Example: To preset AM 1 260 kHz onto preset

ENTER*

2 button.

Example: To preset AM 1 260 kHz onto preset

2 button.

ENTER*

Example: To preset AM 1 260 kHz onto preset

2 button.

ENTER*

2 button.

ENTER*

2 button.

a few seconds after

To preset another station, repeat these steps.

To change the preset station, tune into the desired

To preset another station, repeat these steps.

To change the preset station, tune into the desired

To preset another station, repeat these steps.

station and hold down the PRESET TUNING 1

To change the preset station, tune into the desired

station and hold down the PRESET TUNING 1

To change the preset station, tune into the desired

station and hold down the PRESET TUNING 1

To change the preset station, tune into the desired

station and hold down the PRESET TUNING 1

to 5 button. The new station will replace the

station and hold down the PRESET TUNING 1

to 5 button. The new station will replace the

station and hold down the PRESET TUNING 1

to 5 button. The new station will replace the

previous station on the preset button.

to 5 button. The new station will replace the

previous station on the preset button.

to 5 button. The new station will replace the

previous station on the preset button.

Tuning into a preset station

Press RADIO ON to turn on the radio.

Press one of the PRESET TUNING

Press RADIO ON to turn on the radio.

Press one of the PRESET TUNING

buttons where the desired station is stored.

Press one of the PRESET TUNING

buttons where the desired station is stored.

Adjust volume using VOLUME.

buttons where the desired station is stored.

Adjust volume using VOLUME.

Changing AM

channel step

(except Australian

model)

The AM channel step differs depending on areas. The

channel step of this unit is factory-set to 9 kHz.

The AM channel step differs depending on areas. The

channel step of this unit is factory-set to 9 kHz.

The AM channel step differs depending on areas. The

Change the settings as shown below to be able to

channel step of this unit is factory-set to 9 kHz.

Change the settings as shown below to be able to

channel step of this unit is factory-set to 9 kHz.

Change the settings as shown below to be able to

channel step of this unit is factory-set to 9 kHz.

listen to the radio.

Change the settings as shown below to be able to

listen to the radio.

Change the settings as shown below to be able to

listen to the radio.

Change the settings as shown below to be able to

listen to the radio.

Press RADIO ON to turn on the radio.

listen to the radio.

Press RADIO ON to turn on the radio.

Press RADIO ON repeatedly to select

Press RADIO ON to turn on the radio.

Press RADIO ON repeatedly to select

Press RADIO ON to turn on the radio.

Press RADIO ON repeatedly to select

AM.

Press RADIO ON repeatedly to select

AM.

Press PRESET 2, PRESET 3 and

AM.

Press PRESET 2, PRESET 3 and

AM.

Press PRESET 2, PRESET 3 and

MEGA Xpand at the same time.

Press PRESET 2, PRESET 3 and

MEGA Xpand at the same time.

Press PRESET 2, PRESET 3 and

MEGA Xpand at the same time.

The channel step will change. "AM10" or "AM9"

MEGA Xpand at the same time.

The channel step will change. "AM10" or "AM9"

will be flashed for 3 times in the display. To

The channel step will change. "AM10" or "AM9"

will be flashed for 3 times in the display. To

The channel step will change. "AM10" or "AM9"

will be flashed for 3 times in the display. To

change the channel step again, repeat step 3.

will be flashed for 3 times in the display. To

change the channel step again, repeat step 3.

will be flashed for 3 times in the display. To

change the channel step again, repeat step 3.

Note

When the AM channel step is changed, the clock time

Note

When the AM channel step is changed, the clock time

Note

When the AM channel step is changed, the clock time

will be kept but the preset stations for AM will be

When the AM channel step is changed, the clock time

will be kept but the preset stations for AM will be

When the AM channel step is changed, the clock time

will be kept but the preset stations for AM will be

When the AM channel step is changed, the clock time

initialized.

will be kept but the preset stations for AM will be

initialized.

will be kept but the preset stations for AM will be

initialized.

will be kept but the preset stations for AM will be

initialized.

Setting the alarm

The dual alarm function allows you to set two alarm

programs (ALARM A and ALARM B).

The dual alarm function allows you to set two alarm

programs (ALARM A and ALARM B).

The dual alarm function allows you to set two alarm

programs (ALARM A and ALARM B).

The dual alarm function allows you to set two alarm

The alarm time can be set for each program and the

programs (ALARM A and ALARM B).

The alarm time can be set for each program and the

programs (ALARM A and ALARM B).

The alarm time can be set for each program and the

alarm sound is selectable from RADIO, BUZZER or

The alarm time can be set for each program and the

alarm sound is selectable from RADIO, BUZZER or

The alarm time can be set for each program and the

alarm sound is selectable from RADIO, BUZZER or

The alarm time can be set for each program and the

iPod.

alarm sound is selectable from RADIO, BUZZER or

iPod.

alarm sound is selectable from RADIO, BUZZER or

iPod.

Notes

• Before setting the alarm, make sure to set the clock

Notes

• Before setting the alarm, make sure to set the clock

Notes

• Before setting the alarm, make sure to set the clock

(see "Setting the clock and date").

• Before setting the alarm, make sure to set the clock

(see "Setting the clock and date").

• Before setting the alarm, make sure to set the clock

(see "Setting the clock and date").

• The factory setting alarm time is "AM 12:00" or

(see "Setting the clock and date").

• The factory setting alarm time is "AM 12:00" or

(see "Setting the clock and date").

• The factory setting alarm time is "AM 12:00" or

"0:00".

• The factory setting alarm time is "AM 12:00" or

"0:00".

• The factory setting alarm time is "AM 12:00" or

"0:00".

• To set the radio alarm, first tune in to a station

"0:00".

• To set the radio alarm, first tune in to a station

"0:00".

• To set the radio alarm, first tune in to a station

(see "Operating the radio").

• To set the radio alarm, first tune in to a station

(see "Operating the radio").

• To set the radio alarm, first tune in to a station

(see "Operating the radio").

To set the alarm time

To set ALARM A

Press ALARM SET A for a few seconds.

To set ALARM A

Press ALARM SET A for a few seconds.

Press TIME SET +/– to set the desired

Press ALARM SET A for a few seconds.

Press TIME SET +/– to set the desired

Press ALARM SET A for a few seconds.

Press TIME SET +/– to set the desired

hour, and press ALARM SET A.

Press TIME SET +/– to set the desired

hour, and press ALARM SET A.

Press TIME SET +/– to set the desired

hour, and press ALARM SET A.

Press TIME SET +/– to set the desired

hour, and press ALARM SET A.

Press TIME SET +/– to set the desired

hour, and press ALARM SET A.

Press TIME SET +/– to set the desired

minute, and press ALARM SET A.

Press TIME SET +/– to set the desired

minute, and press ALARM SET A.

Press TIME SET +/– to set the desired

minute, and press ALARM SET A.

Press TIME SET +/– to set the desired

minute, and press ALARM SET A.

Press TIME SET +/– to set the desired

alarm mode (RADIO, BUZZER or iPod)

Press TIME SET +/– to set the desired

alarm mode (RADIO, BUZZER or iPod)

and press ALARM SET A.

alarm mode (RADIO, BUZZER or iPod)

and press ALARM SET A.

alarm mode (RADIO, BUZZER or iPod)

and press ALARM SET A.

If you select the RADIO or iPod, press

and press ALARM SET A.

If you select the RADIO or iPod, press

and press ALARM SET A.

If you select the RADIO or iPod, press

FM MODE

TIME SET +/– to set the wake up

If you select the RADIO or iPod, press

FM MODE

TIME SET +/– to set the wake up

If you select the RADIO or iPod, press

FM MODE

TIME SET +/– to set the wake up

FM MODE

TIME SET +/– to set the wake up

FM MODE

volume and press ALARM SET A.

TIME SET +/– to set the wake up

volume and press ALARM SET A.

TIME SET +/– to set the wake up

volume and press ALARM SET A.

To set ALARM B, follow the same steps above using

volume and press ALARM SET A.

To set ALARM B, follow the same steps above using

ALARM B instead of ALARM A.

To set ALARM B, follow the same steps above using

ALARM B instead of ALARM A.

To set ALARM B, follow the same steps above using

ALARM B instead of ALARM A.

To change the display between ALARM TIME A and

ALARM B instead of ALARM A.

To change the display between ALARM TIME A and

ALARM TIME B, press ALARM DISPLAY.

To change the display between ALARM TIME A and

ALARM TIME B, press ALARM DISPLAY.

To change the display between ALARM TIME A and

ALARM TIME B, press ALARM DISPLAY.

When using iPod touch/iPhone

To use music stored in an iPod touch/iPhone to wake

When using iPod touch/iPhone

To use music stored in an iPod touch/iPhone to wake

When using iPod touch/iPhone

To use music stored in an iPod touch/iPhone to wake

up, put the iPod touch/iPhone into the unit first,

To use music stored in an iPod touch/iPhone to wake

up, put the iPod touch/iPhone into the unit first,

To use music stored in an iPod touch/iPhone to wake

follow the steps above to set alarm time, and then

up, put the iPod touch/iPhone into the unit first,

follow the steps above to set alarm time, and then

up, put the iPod touch/iPhone into the unit first,

follow the steps above to set alarm time, and then

up, put the iPod touch/iPhone into the unit first,

select the desired music.

follow the steps above to set alarm time, and then

select the desired music.

follow the steps above to set alarm time, and then

select the desired music.

follow the steps above to set alarm time, and then

select the desired music.

Notes

select the desired music.

Notes

• When you use the radio alarm, the timed alarm

Notes

• When you use the radio alarm, the timed alarm

Notes

• When you use the radio alarm, the timed alarm

sounds with the last broadcasting station tuned to

• When you use the radio alarm, the timed alarm

sounds with the last broadcasting station tuned to

• When you use the radio alarm, the timed alarm

sounds with the last broadcasting station tuned to

before the power went off. When you set the radio

sounds with the last broadcasting station tuned to

before the power went off. When you set the radio

sounds with the last broadcasting station tuned to

before the power went off. When you set the radio

sounds with the last broadcasting station tuned to

alarm, select the desired broadcasting station before

before the power went off. When you set the radio

alarm, select the desired broadcasting station before

before the power went off. When you set the radio

alarm, select the desired broadcasting station before

turning the power off.

alarm, select the desired broadcasting station before

turning the power off.

alarm, select the desired broadcasting station before

turning the power off.

alarm, select the desired broadcasting station before

• The ALARM A (or B) indicator flashes in the

turning the power off.

• The ALARM A (or B) indicator flashes in the

turning the power off.

• The ALARM A (or B) indicator flashes in the

display when the alarm sounds.

• The ALARM A (or B) indicator flashes in the

display when the alarm sounds.

• The ALARM A (or B) indicator flashes in the

display when the alarm sounds.

• If a second alarm sounds during a first (or the

display when the alarm sounds.

• If a second alarm sounds during a first (or the

display when the alarm sounds.

• If a second alarm sounds during a first (or the

SNOOZE function is active), the second alarm

• If a second alarm sounds during a first (or the

SNOOZE function is active), the second alarm

• If a second alarm sounds during a first (or the

takes priority.

SNOOZE function is active), the second alarm

takes priority.

SNOOZE function is active), the second alarm

takes priority.

SNOOZE function is active), the second alarm

• If the same alarm time is set for both alarm

takes priority.

• If the same alarm time is set for both alarm

takes priority.

• If the same alarm time is set for both alarm

(ALARM A and B), the ALARM A takes priority.

• If the same alarm time is set for both alarm

(ALARM A and B), the ALARM A takes priority.

• If the same alarm time is set for both alarm

(ALARM A and B), the ALARM A takes priority.

To activate the alarm

After setting the alarm time, follow these steps:

To activate the alarm

After setting the alarm time, follow these steps:

To activate the ALARM A, press ALARM

After setting the alarm time, follow these steps:

To activate the ALARM A, press ALARM

SET A to display ALARM A.

To activate the ALARM A, press ALARM

SET A to display ALARM A.

To activate the ALARM B, press ALARM

SET A to display ALARM A.

To activate the ALARM B, press ALARM

SET A to display ALARM A.

To activate the ALARM B, press ALARM

SET B to display ALARM B.

To activate the ALARM B, press ALARM

SET B to display ALARM B.

To activate the ALARM B, press ALARM

SET B to display ALARM B.

Notes

• The alarm sounds at the set time even if the unit is

Notes

• The alarm sounds at the set time even if the unit is

on.

• The alarm sounds at the set time even if the unit is

on.

• The alarm sounds at the set time even if the unit is

on.

• Make sure the iPod is installed correctly after

on.

• Make sure the iPod is installed correctly after

on.

• Make sure the iPod is installed correctly after

setting the iPod alarm.

• Make sure the iPod is installed correctly after

setting the iPod alarm.

• Make sure the iPod is installed correctly after

setting the iPod alarm.

Notes on using iPod touch/iPhone

setting the iPod alarm.

Notes on using iPod touch/iPhone

• If you set the iPod alarm while iPod touch/iPhone

Notes on using iPod touch/iPhone

• If you set the iPod alarm while iPod touch/iPhone

Notes on using iPod touch/iPhone

• If you set the iPod alarm while iPod touch/iPhone

music is playing, and then turn the unit power off,

• If you set the iPod alarm while iPod touch/iPhone

music is playing, and then turn the unit power off,

• If you set the iPod alarm while iPod touch/iPhone

when the alarm time comes on, the alarm music will

music is playing, and then turn the unit power off,

when the alarm time comes on, the alarm music will

music is playing, and then turn the unit power off,

when the alarm time comes on, the alarm music will

music is playing, and then turn the unit power off,

resume from the point where the power was turned

when the alarm time comes on, the alarm music will

resume from the point where the power was turned

when the alarm time comes on, the alarm music will

resume from the point where the power was turned

when the alarm time comes on, the alarm music will

off.

resume from the point where the power was turned

off.

resume from the point where the power was turned

off.

resume from the point where the power was turned

• Even if the iPod alarm setting is complete, if you

off.

• Even if the iPod alarm setting is complete, if you

off.

• Even if the iPod alarm setting is complete, if you

turn the iPod touch/iPhone power off before the

• Even if the iPod alarm setting is complete, if you

turn the iPod touch/iPhone power off before the

• Even if the iPod alarm setting is complete, if you

turn the iPod touch/iPhone power off before the

unit, the iPod alarm will not work.

turn the iPod touch/iPhone power off before the

unit, the iPod alarm will not work.

turn the iPod touch/iPhone power off before the

unit, the iPod alarm will not work.

turn the iPod touch/iPhone power off before the

unit, the iPod alarm will not work.

To doze for a few more minutes

To return to the radio

To doze for a few more minutes

To return to the radio

To doze for a few more minutes

To return to the radio

To doze for a few more minutes

To return to the radio

To doze for a few more minutes

To return to the radio

Press SNOOZE/BRIGHTNESS.

Press RADIO ON.

To doze for a few more minutes

To return to the radio

Press SNOOZE/BRIGHTNESS.

Press RADIO ON.

Press SNOOZE/BRIGHTNESS.

Press RADIO ON.

Press SNOOZE/BRIGHTNESS.

Press RADIO ON.

Press SNOOZE/BRIGHTNESS.

The sound turns off but will automatically come on

Press RADIO ON.

The frequency is shown in the display.

The sound turns off but will automatically come on

Press SNOOZE/BRIGHTNESS.

The frequency is shown in the display.

Press RADIO ON.

The sound turns off but will automatically come on

The frequency is shown in the display.

again after about 5 minutes.

The sound turns off but will automatically come on

The frequency is shown in the display.

again after about 5 minutes.

The sound turns off but will automatically come on

The frequency is shown in the display.

The sound turns off but will automatically come on

again after about 5 minutes.

The frequency is shown in the display.

The maximum length of the snooze time is 40 minutes.

again after about 5 minutes.

To return to the iPod

The maximum length of the snooze time is 40 minutes.

again after about 5 minutes.

To return to the iPod

again after about 5 minutes.

The maximum length of the snooze time is 40 minutes.

To return to the iPod

The maximum length of the snooze time is 40 minutes.

To return to the iPod

The maximum length of the snooze time is 40 minutes.

To return to the iPod

Press N/X.

To stop the alarm

Press N/X.

To stop the alarm

Press N/X.

To stop the alarm

Press N/X.

To stop the alarm

Press N/X.

To stop the alarm

Press OFF to turn off the alarm.

Press N/X.

To stop the alarm

Press OFF to turn off the alarm.

To stop listening

Press OFF to turn off the alarm.

To stop listening

Press OFF to turn off the alarm.

To stop listening

Press OFF to turn off the alarm.

The alarm will come on sound again at the same time

To stop listening

Press OFF to turn off the alarm.

To stop listening

The alarm will come on sound again at the same time

Press OFF,

To stop listening

the next day.

Press OFF,

The alarm will come on sound again at the same time

the next day.

The alarm will come on sound again at the same time

Press OFF,

the next day.

The alarm will come on sound again at the same time

Press OFF,

If OFF is not pressed, the buzzer alarm sounds

Press OFF,

the next day.

If OFF is not pressed, the buzzer alarm sounds

the next day.

Press OFF,

If OFF is not pressed, the buzzer alarm sounds

the next day.

continuously for about 3 minutes, and then it stops

If OFF is not pressed, the buzzer alarm sounds

continuously for about 3 minutes, and then it stops

If OFF is not pressed, the buzzer alarm sounds

Troubleshooting

automatically.

Troubleshooting

continuously for about 3 minutes, and then it stops

automatically.

Troubleshooting

continuously for about 3 minutes, and then it stops

automatically.

continuously for about 3 minutes, and then it stops

Troubleshooting

The RADIO and iPod sound continuously until OFF

Troubleshooting

automatically.

The RADIO and iPod sound continuously until OFF

automatically.

Troubleshooting

The RADIO and iPod sound continuously until OFF

automatically.

is pressed.

Should any problem occur with the unit, make the

The RADIO and iPod sound continuously until OFF

is pressed.

Should any problem occur with the unit, make the

is pressed.

The RADIO and iPod sound continuously until OFF

Should any problem occur with the unit, make the

following simple checks to determine whether or not

is pressed.

Should any problem occur with the unit, make the

following simple checks to determine whether or not

Should any problem occur with the unit, make the

is pressed.

following simple checks to determine whether or not

Should any problem occur with the unit, make the

To deactivate the alarm

servicing is required.

following simple checks to determine whether or not

To deactivate the alarm

following simple checks to determine whether or not

servicing is required.

To deactivate the alarm

following simple checks to determine whether or not

servicing is required.

To deactivate the alarm

If the problem persists, consult your nearest Sony

servicing is required.

To deactivate the alarm

If the problem persists, consult your nearest Sony

servicing is required.

Press ALARM SET A (or B) to turn off the

To deactivate the alarm

Press ALARM SET A (or B) to turn off the

If the problem persists, consult your nearest Sony

servicing is required.

dealer.

Press ALARM SET A (or B) to turn off the

If the problem persists, consult your nearest Sony

dealer.

If the problem persists, consult your nearest Sony

Press ALARM SET A (or B) to turn off the

ALARM A (or B) indicator from the display.

If the problem persists, consult your nearest Sony

dealer.

Press ALARM SET A (or B) to turn off the

ALARM A (or B) indicator from the display.

Press ALARM SET A (or B) to turn off the

dealer.

ALARM A (or B) indicator from the display.

dealer.

ALARM A (or B) indicator from the display.

The clock displays "AM 12:00" or "0:00" due

ALARM A (or B) indicator from the display.

Note on alarm in the event of a power

The clock displays "AM 12:00" or "0:00" due

Note on alarm in the event of a power

The clock displays "AM 12:00" or "0:00" due

to a power interruption.

Note on alarm in the event of a power

to a power interruption.

The clock displays "AM 12:00" or "0:00" due

interruption

Note on alarm in the event of a power

The clock displays "AM 12:00" or "0:00" due

to a power interruption.

interruption

Note on alarm in the event of a power

• The battery is low. Replace the battery. Remove the

to a power interruption.

Note on alarm in the event of a power

interruption

to a power interruption.

• The battery is low. Replace the battery. Remove the

• When the alarm sound is set to RADIO or iPod, it

interruption

to a power interruption.

• The battery is low. Replace the battery. Remove the

interruption

• When the alarm sound is set to RADIO or iPod, it

old battery and install a new one.

interruption

• When the alarm sound is set to RADIO or iPod, it

• The battery is low. Replace the battery. Remove the

old battery and install a new one.

will change to BUZZER automatically.

• When the alarm sound is set to RADIO or iPod, it

old battery and install a new one.

will change to BUZZER automatically.

• The battery is low. Replace the battery. Remove the

• When the alarm sound is set to RADIO or iPod, it

will change to BUZZER automatically.

old battery and install a new one.

will change to BUZZER automatically.

The alarm does not sound at the preset alarm

• If the backup battery is exhausted, the alarm will not

will change to BUZZER automatically.

old battery and install a new one.

The alarm does not sound at the preset alarm

• If the backup battery is exhausted, the alarm will not

will change to BUZZER automatically.

• If the backup battery is exhausted, the alarm will not

The alarm does not sound at the preset alarm

time.

work in the event of power interruption. Replace the

The alarm does not sound at the preset alarm

• If the backup battery is exhausted, the alarm will not

time.

The alarm does not sound at the preset alarm

• If the backup battery is exhausted, the alarm will not

work in the event of power interruption. Replace the

time.

The alarm does not sound at the preset alarm

• If the backup battery is exhausted, the alarm will not

battery periodically.

• Has the desired alarm been activated? (i.e., Does the

time.

work in the event of power interruption. Replace the

• Has the desired alarm been activated? (i.e., Does the

time.

work in the event of power interruption. Replace the

battery periodically.

• Has the desired alarm been activated? (i.e., Does the

time.

work in the event of power interruption. Replace the

ALARM A (or B) indicator light up?)

battery periodically.

• Has the desired alarm been activated? (i.e., Does the

ALARM A (or B) indicator light up?)

battery periodically.

• Has the desired alarm been activated? (i.e., Does the

ALARM A (or B) indicator light up?)

battery periodically.

ALARM A (or B) indicator light up?)

The radio or iPod alarm is activated but no

ALARM A (or B) indicator light up?)

Setting the sleep

The radio or iPod alarm is activated but no

Setting the sleep

The radio or iPod alarm is activated but no

Setting the sleep

sound comes on at the preset alarm time.

The radio or iPod alarm is activated but no

Setting the sleep

sound comes on at the preset alarm time.

The radio or iPod alarm is activated but no

Setting the sleep

The radio or iPod alarm is activated but no

sound comes on at the preset alarm time.

Setting the sleep

• Has VOLUME been adjusted?

timer

sound comes on at the preset alarm time.

• Has VOLUME been adjusted?

sound comes on at the preset alarm time.

timer

sound comes on at the preset alarm time.

• Has VOLUME been adjusted?

timer

• Has VOLUME been adjusted?

timer

• Has VOLUME been adjusted?

timer

• Has VOLUME been adjusted?

There is no sound from the iPod.

timer

There is no sound from the iPod.

• Make sure the iPod is securely connected.

There is no sound from the iPod.

You can fall asleep to the sound using the built-in

There is no sound from the iPod.

• Make sure the iPod is securely connected.

You can fall asleep to the sound using the built-in

• Make sure the iPod is securely connected.

There is no sound from the iPod.

You can fall asleep to the sound using the built-in

• Adjust the VOLUME.

• Make sure the iPod is securely connected.

sleep timer that turns off the unit automatically after a

• Make sure the iPod is securely connected.

You can fall asleep to the sound using the built-in

• Adjust the VOLUME.

sleep timer that turns off the unit automatically after a

You can fall asleep to the sound using the built-in

• Make sure the iPod is securely connected.

• Adjust the VOLUME.

sleep timer that turns off the unit automatically after a

You can fall asleep to the sound using the built-in

preset duration.

• Adjust the VOLUME.

sleep timer that turns off the unit automatically after a

• Adjust the VOLUME.

sleep timer that turns off the unit automatically after a

preset duration.

• Adjust the VOLUME.

The iPod cannot be operated with this unit.

preset duration.

sleep timer that turns off the unit automatically after a

The iPod cannot be operated with this unit.

preset duration.

The iPod cannot be operated with this unit.

preset duration.

Press SLEEP while the unit is turned on.

• Make sure the iPod is securely connected.

The iPod cannot be operated with this unit.

preset duration.

Press SLEEP while the unit is turned on.

• Make sure the iPod is securely connected.

The iPod cannot be operated with this unit.

Press SLEEP while the unit is turned on.

• Make sure the iPod is securely connected.

The iPod cannot be operated with this unit.

Press SLEEP while the unit is turned on.

• Make sure the iPod is securely connected.

SLEEP appears in the display.

• Make sure the iPod is securely connected.

SLEEP appears in the display.

Press SLEEP while the unit is turned on.

The iPod cannot be charged.

• Make sure the iPod is securely connected.

SLEEP appears in the display.

The iPod cannot be charged.

Press SLEEP to set the sleep timer

SLEEP appears in the display.

The iPod cannot be charged.

Press SLEEP to set the sleep timer

SLEEP appears in the display.

• Make sure the iPod is securely connected.

The iPod cannot be charged.

Press SLEEP to set the sleep timer

SLEEP appears in the display.

• Make sure the iPod is securely connected.

The iPod cannot be charged.

Press SLEEP to set the sleep timer

The iPod cannot be charged.

• Make sure the iPod is securely connected.

duration.

Press SLEEP to set the sleep timer

duration.

Press SLEEP to set the sleep timer

• Make sure the iPod is securely connected.

duration.

• Make sure the iPod is securely connected.

Each time you press SLEEP, the duration

duration.

Each time you press SLEEP, the duration

duration.

Each time you press SLEEP, the duration

Specifications

changes as follows:

Each time you press SLEEP, the duration

changes as follows:

Specifications

Each time you press SLEEP, the duration

changes as follows:

Specifications

changes as follows:

Specifications

changes as follows:

Time display

OFF

Time display

Model for Central America: 12-hour system

OFF

Time display

Model for Central America: 12-hour system

OFF

Time display

Model for Central America: 12-hour system

OFF

Model for other countries / regions: 24-hour

OFF

Model for Central America: 12-hour system

Model for other countries / regions: 24-hour

Model for Central America: 12-hour system

The display returns to clock mode five seconds

OFF

The display returns to clock mode five seconds

Model for other countries / regions: 24-hour

Model for Central America: 12-hour system

system

The display returns to clock mode five seconds

Model for other countries / regions: 24-hour

system

Model for other countries / regions: 24-hour

after you have finished setting the duration setting

The display returns to clock mode five seconds

after you have finished setting the duration setting

system

Model for other countries / regions: 24-hour

after you have finished setting the duration setting

The display returns to clock mode five seconds

system

Frequency range

and released SLEEP, and then the sleep timer

after you have finished setting the duration setting

Frequency range

system

after you have finished setting the duration setting

and released SLEEP, and then the sleep timer

after you have finished setting the duration setting

and released SLEEP, and then the sleep timer

Frequency range

starts.

and released SLEEP, and then the sleep timer

Frequency range

Model for Australia

Frequency range

starts.

and released SLEEP, and then the sleep timer

Model for Australia

and released SLEEP, and then the sleep timer

Frequency range

Model for Australia

starts.

Model for Australia

starts.

The unit will play for the duration you set, and

Model for Australia

Band

The unit will play for the duration you set, and

starts.

Model for Australia

Band

The unit will play for the duration you set, and

starts.

Band

then shut off.

The unit will play for the duration you set, and

then shut off.

Band

The unit will play for the duration you set, and

then shut off.

Band

then shut off.

To turn off the unit before the

preset time

To turn off the unit before the

preset time

Model for other countries / regions

preset time

Model for other countries / regions

preset time

Model for other countries / regions

Press OFF.

Model for other countries / regions

Band

Press OFF.

Model for other countries / regions

Band

Press OFF.

Band

Press OFF.

Band

Press OFF.

Band

To use both sleep timer and

alarm

To use both sleep timer and

alarm

You can fall asleep to the radio and also be awakened

alarm

Speaker

You can fall asleep to the radio and also be awakened

Speaker

You can fall asleep to the radio and also be awakened

Speaker

by the radio or buzzer alarm at the preset time.

Approx. 5.1 cm (2 inches) dia., 12 Ω

You can fall asleep to the radio and also be awakened

Speaker

by the radio or buzzer alarm at the preset time.

You can fall asleep to the radio and also be awakened

Approx. 5.1 cm (2 inches) dia., 12 Ω

Speaker

by the radio or buzzer alarm at the preset time.

You can fall asleep to the radio and also be awakened

Speaker

Approx. 5.1 cm (2 inches) dia., 12 Ω

by the radio or buzzer alarm at the preset time.

Approx. 5.1 cm (2 inches) dia., 12 Ω

by the radio or buzzer alarm at the preset time.

Approx. 5.1 cm (2 inches) dia., 12 Ω

Set the alarm. (See "Setting the alarm".)

Power output

by the radio or buzzer alarm at the preset time.

Approx. 5.1 cm (2 inches) dia., 12 Ω

Set the alarm. (See "Setting the alarm".)

Power output

Set the alarm. (See "Setting the alarm".)

Power output

Set the alarm. (See "Setting the alarm".)

Power output

3 W + 3 W (at 10% harmonic distortion)

Set the alarm. (See "Setting the alarm".)

Power output

3 W + 3 W (at 10% harmonic distortion)

Set the alarm. (See "Setting the alarm".)

Set the sleep timer. (See "Setting the sleep

Power output

3 W + 3 W (at 10% harmonic distortion)

Set the sleep timer. (See "Setting the sleep

3 W + 3 W (at 10% harmonic distortion)

Set the sleep timer. (See "Setting the sleep

3 W + 3 W (at 10% harmonic distortion)

Power requirements

3 W + 3 W (at 10% harmonic distortion)

Set the sleep timer. (See "Setting the sleep

Power requirements

timer".)

Set the sleep timer. (See "Setting the sleep

Power requirements

timer".)

Set the sleep timer. (See "Setting the sleep

timer".)

Power requirements

Model for Australia: 230 V AC, 50 Hz

Power requirements

Model for Australia: 230 V AC, 50 Hz

timer".)

Power requirements

timer".)

Model for Australia: 230 V AC, 50 Hz

timer".)

Model for other countries / regions:

Model for Australia: 230 V AC, 50 Hz

Model for other countries / regions:

Model for Australia: 230 V AC, 50 Hz

Model for other countries / regions:

Model for Australia: 230 V AC, 50 Hz

230 – 240 V AC, 60 Hz

Other useful functions

Model for other countries / regions:

230 – 240 V AC, 60 Hz

Model for other countries / regions:

Other useful functions

230 – 240 V AC, 60 Hz

Model for other countries / regions:

Other useful functions

For clock backup: 3 V DC, one CR2032 battery

230 – 240 V AC, 60 Hz

Other useful functions

For clock backup: 3 V DC, one CR2032 battery

230 – 240 V AC, 60 Hz

Other useful functions

For clock backup: 3 V DC, one CR2032 battery

230 – 240 V AC, 60 Hz

Other useful functions

For clock backup: 3 V DC, one CR2032 battery

Dimensions

For clock backup: 3 V DC, one CR2032 battery

To get the MEGA Xpand effect

Dimensions

To get the MEGA Xpand effect

Approx. 300 × 130 × 139 mm (w/h/d)

To get the MEGA Xpand effect

Dimensions

Approx. 300 × 130 × 139 mm (w/h/d)

To get the MEGA Xpand effect

Approx. 300 × 130 × 139 mm (w/h/d)

Dimensions

To get the MEGA Xpand effect

Approx. 300 × 130 × 139 mm (w/h/d)

(11

To get the MEGA Xpand effect

(11

Approx. 300 × 130 × 139 mm (w/h/d)

MEGA Xpand

Press

. "MEGA Xpand" appears in

Approx. 300 × 130 × 139 mm (w/h/d)

MEGA Xpand

(11

Press

. "MEGA Xpand" appears in

MEGA Xpand

and controls

(11

Press

. "MEGA Xpand" appears in

and controls

(11

MEGA Xpand

the display. You can get the effect of expansion of the

Press

MEGA Xpand

. "MEGA Xpand" appears in

and controls

(11

the display. You can get the effect of expansion of the

Press

. "MEGA Xpand" appears in

MEGA Xpand

and controls

Press

. "MEGA Xpand" appears in

the display. You can get the effect of expansion of the

Mass

and controls

sound field. To return to normal sound, press the

Mass

and controls

the display. You can get the effect of expansion of the

sound field. To return to normal sound, press the

Mass

the display. You can get the effect of expansion of the

sound field. To return to normal sound, press the

Mass

Approx. 1.9 kg (4 lb 3.02 oz) incl. CR2032 battery

button again.

sound field. To return to normal sound, press the

Mass

Approx. 1.9 kg (4 lb 3.02 oz) incl. CR2032 battery

button again.

sound field. To return to normal sound, press the

Mass

Approx. 1.9 kg (4 lb 3.02 oz) incl. CR2032 battery

button again.

sound field. To return to normal sound, press the

Approx. 1.9 kg (4 lb 3.02 oz) incl. CR2032 battery

button again.

Approx. 1.9 kg (4 lb 3.02 oz) incl. CR2032 battery

button again.

Supplied accessories

Approx. 1.9 kg (4 lb 3.02 oz) incl. CR2032 battery

button again.

Supplied accessories

Remote commander (1)

Supplied accessories

Connecting

Supplied accessories

Remote commander (1)

Connecting

Supplied accessories

Remote commander (1)

Connecting

Audio connecting cable (1)

Remote commander (1)

Audio connecting cable (1)

Connecting

Remote commander (1)

Connecting

Audio connecting cable (1)

Remote commander (1)

Connecting

AM loop aerial (1)

Audio connecting cable (1)

external equipment

AM loop aerial (1)

Audio connecting cable (1)

external equipment

AM loop aerial (1)

Audio connecting cable (1)

external equipment

AM loop aerial (1)

external equipment

AM loop aerial (1)

external equipment

AM loop aerial (1)

external equipment

Design and specifications are subject to change

To listen to sound

Design and specifications are subject to change

To listen to sound

without notice.

Design and specifications are subject to change

without notice.

Design and specifications are subject to change

To listen to sound

without notice.

Design and specifications are subject to change

To listen to sound

without notice.

To listen to sound

Connect the AUDIO IN jack of the unit to

without notice.

Connect the AUDIO IN jack of the unit to

the line out jack or headphone jack of the

Connect the AUDIO IN jack of the unit to

the line out jack or headphone jack of the

external equipment using the audio

the line out jack or headphone jack of the

external equipment using the audio

the line out jack or headphone jack of the

external equipment using the audio

connecting cable (supplied).

external equipment using the audio

connecting cable (supplied).

external equipment using the audio

connecting cable (supplied).

Audio connecting cable

(supplied)

Audio connecting cable

(supplied)

Audio connecting cable

(supplied)

Audio connecting cable

(supplied)

To external

(supplied)

To external

equipment

To external

equipment

To external

equipment

Press AUDIO IN to display "AUDIO IN".

Play the equipment connected to the

Press AUDIO IN to display "AUDIO IN".

Play the equipment connected to the

AUDIO IN jack.

Play the equipment connected to the

AUDIO IN jack.

Play the equipment connected to the

AUDIO IN jack.

Adjust the volume using VOLUME.

AUDIO IN jack.

Adjust the volume using VOLUME.

AUDIO IN jack.

Adjust the volume using VOLUME.

and stop playback on the connected unit.

Frequency

Channel step

Frequency

Channel step

Frequency

Channel step

Frequency

Channel step

Frequency

Channel step

87.5 – 108 MHz

0.05 MHz

87.5 – 108 MHz

Frequency

Channel step

0.05 MHz

87.5 – 108 MHz

0.05 MHz

87.5 – 108 MHz

0.05 MHz

87.5 – 108 MHz

0.05 MHz

531 – 1 611 kHz

9 kHz

531 – 1 611 kHz

87.5 – 108 MHz

0.05 MHz

9 kHz

531 – 1 611 kHz

9 kHz

531 – 1 611 kHz

9 kHz

531 – 1 611 kHz

9 kHz

531 – 1 611 kHz

9 kHz

Frequency

Channel step

Frequency

Channel step

Frequency

Channel step

Frequency

Channel step

Frequency

Channel step

87.5 – 108 MHz

0.05 MHz

87.5 – 108 MHz

Frequency

Channel step

0.05 MHz

87.5 – 108 MHz

0.05 MHz

87.5 – 108 MHz

0.05 MHz

87.5 – 108 MHz

531 – 1 611 kHz

0.05 MHz

9 kHz

531 – 1 611 kHz

9 kHz

87.5 – 108 MHz

0.05 MHz

531 – 1 611 kHz

9 kHz

530 – 1 710 kHz

10 kHz

531 – 1 611 kHz

9 kHz

530 – 1 710 kHz

10 kHz

531 – 1 611 kHz

9 kHz

531 – 1 611 kHz

530 – 1 710 kHz

10 kHz

9 kHz

530 – 1 710 kHz

10 kHz

530 – 1 710 kHz

10 kHz

530 – 1 710 kHz

10 kHz

× 5

inches) incl. projecting parts

× 5

inches) incl. projecting parts

× 5

inches) incl. projecting parts

× 5

inches) incl. projecting parts

× 5

inches) incl. projecting parts

× 5

inches) incl. projecting parts

Operating The Radio; Specifications - Sony Dream Machine ICF-C1iPMK2 Operating Instructions

Operating the radio

Specifications

Related Manuals for Sony Dream Machine ICF-C1iPMK2

Related Content for Sony Dream Machine ICF-C1iPMK2