Sanyo POA-HDTM01 Owner's Manual page 27

Mode select
1. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to
move the red frame pointer to the HD DATA WIRELESS icon.
2. Use the Point de buttons to move the
red frame pointer to the Mode Select
icon and then press the SELECT button
twice. A dialog box appears.
3. Use the Point de buttons to select
Broadcast mode and then press the
SELECT button.
Input ID
1. Before inputting the ID Number, check
the ID Number in the transmitter.
2. Use the Point de buttons to select
Input ID and then press the SELECT
button.
3. Input the ID Number as follows;
Select a number by pressing the Point
de buttons. And then press the Point
8 button to fix the number and move
the pointer. If you fixed the incorrect
number, move the pointer to the
number you want to correct by pressing
the Point 7 button, and then select the
correct number by pressing the Point
de buttons.
4. Repeat this step to complete entering an
eight-digit number.
5. After entering the eight-digit number,
move the pointer to "Set" by pressing
the Point 8 button. Press the Select
button to continue.
6. Confirmation box appears, select [Yes] to
confirm the ID Number.
✐ Once authenticated in Single mode, the ID Number of the transmitter which has been set in Single
mode will be displayed as a default. When switching from Single mode to Broadcast mode, change the
ID Number to the new one of the transmitter.
Mode Select Menu
Input ID Menu
HD DATA WIRELESS TRANSMITTER BOX
Broadcast Mode Operation
PROJECTOR
OWNER'S MANUAL