Connecting The Ac Power Cord - Sanyo POA-HDTM01 Owner's Manual

Connecting the AC Power Cord

This transmitter uses nominal input
voltages of 100–120 V or 200–240 V AC.
- The AC outlet must be near this
equipment and must be easily
accessible.
- Use only the supplied AC
adaptor, and do not use any
other AC adaptor. Otherwise, a
malfunction may occur.
e
Note on the AC Power Cord
AC power cord must meet the requirements of the country where you use the transmitter.
Confirm the AC plug type with the chart below and proper AC power cord must be used. If
the supplied AC power cord does not match your AC outlet, contact your sales dealer.
AC adapter side
AC power cord
AC adaptor
q
For the U.S. and
Canada
To the AC outlet
(120 V AC)
Connect the AC adaptor with following
steps q to e.
When disconnecting, reverse the order.
✔Note:
- Be sure to turn off the transmitter, before
disconnecting the AC power cord.
- Unplug the AC power cord when the
transmitter is not in use. When the
transmitter is connected to an outlet with
the AC power cord, it is in stand-by mode
and consumes a little electric power.
w
DC16V 2.5A
AC outlet side
For Continental
Europe
To the AC outlet
(200 - 240 V AC)
HD DATA WIRELESS TRANSMITTER BOX
Installation
For the U.K.
To the AC outlet
(200 - 240 V AC)
1
OWNER'S MANUAL