Sanyo PLV-Z700 Owner's Manual page 25

Menu Operation
1
Use the Point ed buttons to select the Input Menu and
press the Point 8 or OK buttons to access the submenu
items.
2
Use the Point ed buttons to select an input source and
press the Point 8 or OK buttons. The selected item is check
marked.
3
When "Video" or "S-video" is selected, press the Point
button to display the System Menu.
4
Use the Point buttons to select the desired system and
ed
press the Point or OK buttons.
8
5
When "Computer" is selected, press the Point
display the Source Select Menu.
6
Use the Point ed buttons to select the desired source and
press the Point or OK buttons.
8
Video or S-Video
When the video signal is connected to the VIDEO or S-VIDEO
jacks, select Video or S-video respectively.
Auto
The projector automatically detects the incoming video system
and adjusts itself to optimize its performance.
When the video system is PAL -M or PAL -N, select the system
manually.
PAL / SECAM / NTSC / NTSC4 .43 / PAL-M / PAL-N
If the projector cannot reproduce a proper video image, select
a specific broadcast signal format from among PAL, SECAM,
NTSC, NTSC 4.43, PAL -M, and PAL -N.
Component 1 or Component 2
When the video signal is connected to the Y-Pb/Cb-Pr/Cr jacks,
select Component 1 or Component 2.
The projector automatically detects the incoming video signal and
adjusts itself to optimize its performance.
Input Menu
8
button to
8
System Menu (Video/S-Video)
The currently set item
is check marked.
Press the Point
8
Video
to display the System
Input
Menu.
Use the Point buttons
ed
to select the desired
system and press the
Point 8 or OK buttons.
Quit
Exit this menu.
Input
button
25