Damper Pedal - Kawai anytime x3 ATX3L Owner's Manual

a LED power indicator
This LED lights up when this instrument's control box is turned
on.
b POWER Button
This button is used to turn this instrument on/off.
Be sure to turn off this instrument after playing.
* This instrument features a power saving mode that can turn off the
instrument automatically after a specified period of inactivity.
For more information, please refer to the "Auto Power Off" setting on
page 25.
c MASTER VOLUME knob
This knob is used to adjust the volume when AnyTime mode is
activated
* The MASTER VOLUME knob will also affect the volume level of the LINE
OUT connectors.
d HEADPHONES jacks
These jacks are used to connect up to two pairs of headphones
simultaneously.
e MIDI IN/OUT jacks
These jacks are used to connect this instrument to external
MIDI devices such as other electronic instruments or computers
in order to send and receive MIDI data.
f USB to HOST port
This port is used to connect this instrument to a computer
using USB "B to A" type cable in order to send and receive MIDI
data.
g Headphone hook
This hook is used to conveniently hang the headphones when
not in use.
h Muffler lever
This lever is used to activate/deactivate the muffler system of
the acoustic piano.
Pull the lever to activate and push it back to deactivate.
i Damper pedal
This pedal is used to remove all dampers from strings, allowing
them to vibrate freely. Depressing this pedal sustains the sound
after one's hand have been lifted from the keyboard – greatly
enriching the piano sound, while also assisting smooth "legato"
passages.
j Mute pedal
This pedal is used to mute the acoustic piano sound by
depressing the pedal and sliding it gently to the left, thus
activating AnyTime mode. Do not attempt to activate/
deactivate AnyTime mode while playing the piano as this can
cause serious damage to the action mechanism of this
instrument.
k Soft pedal / Sostenuto pedal
This pedal is used to soften the sound, reducing its volume.
When the "Jazz Organ" sound is selected, the soft pedal is used
to alternate the speed of the rotary speaker simulation
between "Slow" and "Fast" effect modes.
It is also possible to use the Soft pedal as the Sostenuto pedal
by depressing the pedal while turning this instrument on. In
Sostenuto mode, depressing the pedal after playing the
keyboard and before releasing the keys sustain the sound of
only the keys just played. Any keys that are pressed after the
Sostenuto pedal is depressed will not be sustained after the
keys are released.
Furthermore, the Soft pedal is used to select different sounds,
change reverb setting, and adjust various other setting of this
instrument.
l DC IN jack
This jack is used to connect the AC adaptor.
9