Table of Contents
Advertisement
The MIDI Channel function is used to determine on which MIDI channel this instrument will exchange MIDI
information with external MIDI devices and instruments.
The selected channel will function as both the Transmit and Receive channel.
A ctivating Setting Mode
Depress the Soft pedal
The above combination of holding the Soft pedal while pressing C8 key will activate Setting Mode.
* If the Damper pedal is held while performing the above combination, Setting Mode will not be activated.
* If another key is pressed while depressing the Soft pedal, Setting Mode will not be activated.
A djusting MIDI Channel
Press white C3 to D5 keys to adjust the MIDI channel.
Please refer to the table below for a list of MIDI channels and the respective key assignments.
Key
C3
MIDI Channel
1
* The MIDI channel can be adjusted within the range of 1-16.
* Press C#3 key to allow MIDI information to be received from all channels.
This is often referred to as "OMNI ON". If a specific MIDI channel is selected, this instrument will be set to "OMNI OFF" and data will only be received on
that specified channel.
D eactivating Setting Mode
After adjusting the desired MIDI channel settings, depress the Damper pedal to deactivate Setting Mode.
* The MIDI channel setting will be set to "OMNI ON 1ch" automatically when the power is turned on.
* For more information regarding the MIDI capabilities of this instrument, please refer to "MIDI Implementation Chart" on page 30.
While holding the Soft pedal, press and
hold C8 key (the top-most C key)
MIDI channel
D3
E3
F3
G3
A3
2
3
4
5
6
Release the Soft pedal,
then release C8 key
B3
C4
D4
E4
F4
7
8
9
10
11
G4
A4
B4
C5
D5
12
13
14
15
16
23
Advertisement
Table of Contents
