Related Manuals for EXTERIS AUDIO EA300SW
Summary of Contents for EXTERIS AUDIO EA300SW
- Page 1 Outdoor Audio Solutions: Unique Outdoor Speakers & Stereos OWNER’S MANUAL Model EA300SW Stand-Alone Outdoor Stereo/Speakers www.ExterisAudio.com Copyright © 2011-2017 Exteris Audio, LLC All Rights Reserved.
-
Page 2: Table Of Contents
TABLE OF CONTENTS * These specs provided for reference since EA300SW speakers are not intended to be driven from an external amplifier. However, if Design Features..............1 desired, the two upper speakers can be used with an external stereo Introduction................2 amplifier. -
Page 3: Design Features
Model EA300SW Model EA300SW Design Features Specifications Front View Drivers per Pair: Tweeter 2 - 1” Titanium dome / ferrofluid cooled Titanium Dome Perforated Tweeter Cabinet Woofer 2 - 6.5” Polypropylene cone with rubber Aluminum Grills Alignment > Exterior Grade... -
Page 4: Introduction
CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company any EA300SW’s use only low 12vac/dc voltages, and are safe to place in any liability other than expressed herein in connection with the sale of this outdoor environment, including wet locations. -
Page 5: Contents
New and/or 14. 1/4” x 1” stainless steel alignment pins reconditioned parts may be used for warranty repairs. Repaired or 15. EA300SW Owner’s Manual replaced parts and products are warranted for the remainder of the 16. CD/FM/AM Stereo Owner’s Manual original warranty period. - Page 6 Model EA300SW Model EA300SW High and Low Temperature Protection Your new speaker/stereo system incorporates onboard temperature sensing to monitor internal cabinet temperatures to help manage and minimize excessive heat and cold. Fig. 1 High temperature protection is accomplished by using a cooling fan to (Stereo Cabinet) provide a constant supply of filtered forced air ventilation.
- Page 7 Model EA300SW Model EA300SW 5. From boxes with cabinets A,C remove the top four (4) foam corner Cabinets – Since all natural stone has some level of porosity, it is protectors and place in the up position on a solid surface. Next, move important that a high quality sealer be used periodically.
-
Page 8: Maintenance
Model EA300SW Model EA300SW 1c. Locate eight (8) Adjustable Feet with locknuts and thread two (2) In order to maintain the highest audio fidelity possible, the following into each of four (4) Base Supports until snug. speaker cable lengths versus wire gauges are recommended: 2. - Page 9 If in doubt, seek help. Once you are satisfied you can carry the weight, carefully lift and move cabinet Model EA300SW speaker/stereo system is a “stand-alone” system, B to its final install location. which only requires wiring runs between the left and right speakers and to a UL Approved 12vac-120W outdoor transformer as noted in Fig.
- Page 10 Model EA300SW Model EA300SW 6a. Using the recessed handles in the backs of cabinets A and C, insert right or left hand into handle, steady the top of the cabinet with your other hand as noted in Fig. 8, carefully perform a test lift to ensure you can safely carry the cabinet.
Need help?
Do you have a question about the EA300SW and is the answer not in the manual?
Questions and answers