TABLE OF CONTENTS Design Features..............1 Introduction................2 Install Location..............2 Cautions................3 Inspection................3 Contents................3 Unpacking................3 Installation................4 Power/Audio Connections............ 7 Maintenance................ 8 Warranty................9 Specifications............... 11 WARNING! Plastic bags are used in the packaging of your speakers.
EA500CSA EA500CSA Design Features Front View Accessory Bay Accessory Bay Drawer Open Drawer Closed Pwr & LED Lights Sw LED Lights Mylar Tweeters Travertine Decorative Stone Travertine 3.5mm Audio Cabinet Inlay & 5v USB >Polished Connections > Sealed Polypropylene Accessory...
“like new” and small streaming audio receivers up appearance. Our EA500CSA speaker system is designed to be mounted to about 4"W x 7-1/2"L x 1-1/2"D directly to a masonry wall or wooden stud wall structure suitable for supporting a weight of 30 pounds.
EA500CSA EA500CSA This Warranty is not transferable and does not cover product purchased, Cautions serviced or used outside the United States. The Warranty does not extend to the elimination of externally generated static or noise, or to Our outdoor speaker systems are fully weatherproof and water resistant, costs incurred for the installation, removal or re-installation of the when installed in accordance with this Owner’s Manual.
EA500CSA EA500CSA 1/3/5 Year Limited Warranty Exteris Audio, LLC (the “Company”) warrants this outdoor speaker NOTE! Cabinet may be too heavy for some people to remove system, whether used outdoors or indoors, against defects in material carefully and safely; seek help if needed. Also, save boxes/shipping materials for future transport or shipment.
Page 7
EA500CSA EA500CSA minimum of two holes [four preferred] will need to be NOTE! The Accessory Bay Drawer is intended for use as temporary marked/drilled. If only two holes are used, then top two outer storage only of source music devices. This drawer is not designed holes or the top-center and bottom-center should be used.
These Integrated standard connections allow a wide 4b. To mount the EA500CSA on the wall, raise the mounting plate on array of source music devices to be Stereo Amp the speaker system back above the WMP, move the speaker connected, such as phones, tablets, system back toward the wall.
Need help?
Do you have a question about the EA500CSA and is the answer not in the manual?
Questions and answers