SolarEdge Smart Modules Installation Manual page 9

Clamping
Figure 3: Middle clamps
Figure 4: Side calmps
Figure 5: End clamp installation
Figure 6: Middle clamp installation
6. For mounting across the supporting rails,(Figure 1), slide bolts through groove on the supporting rails next to the locations where the 4 clamps are to be
fastened.
The module may be clamped only in the permitted clamping area as on the long edge of the frame. For exact locations on the frame refer to Figure 7 in
conjunction with table "Modules Dimensions" on the next page
Smart Modules Installation Guide MAN-01-00520-1.0
8