Cylinder - SodaStream Aqua Fizz Quick Start Manual

INSTALLING THE CO

CYLINDER

2
1. 2.
4 5.
3.
6.
1. Place the AQUA FIZZ™ Sparkling Water Maker on a flat sturdy
surface in an upright position. Remove the glass carafe if it is
installed in the Sparkling Water Maker. Never insert or replace
the cylinder while a glass carafe is installed in the Sparkling
Water Maker. Turn the flask lever to the right to the unlocked
position. The carbonating head will rise automatically.
2. Tilt the glass carafe flask forward and remove the glass carafe.
3. Return the glass carafe flask to the upright position, push and
hold the carbonating head down and turn the flask lever left, to
the locked position.
4. Press the rear cover release button downwards and remove the
back cover .
5. Remove seal and cap from the SodaStream CO
the cylinder into the cylinder holder situated on the underside of
the carbonating button and screw to the right while applying
gentle pressure until it is firmly held in place. Hand-tighten only;
DO NOT use tools.
6. Replace the back cover so that it clicks into place. Now you are
ready to create the bubbles.
cylinder. Insert
2