On-Screen Menu - Sanyo PLC-XU25 Owner's Manual

Basic Operation

On-Screen Menu

You can control and adjust this projector through the On-Screen
Menu. Refer to the following pages to operate each adjustment
on the On-Screen Menu.
1 Press the MENU button to display the On-Screen Menu
(Menu bar). A red frame is a pointer.
2
Move the pointer (red frame) to the Menu icon that you want
to select by pressing the Point Left/Right button.
3 Press the Point Down button and move the pointer (red
frame or red arrow) to the item that you want to adjust, and
then press the SELECT button to show the item data.
4 Adjust the item data by pressing the Point Left/Right button.
Refer to the following pages for details of respective
adjustments.
5
To close this menu, select Quit. To clear the On-Screen
Menu, press the MENU button on the top control or on the
remote control.
22
Remote Control
Top Control
ON - OFF
POWER
INPUT
WARNING
KEYSTONE LAMP
REPLACE
SELECT
MENU
On-Screen Menu
Menu bar
Pointer (red frame)
Press the Point Down but-
ton to move the pointer.
Item
SELECT
button
Item data
Press the Point Left/Right but-
tons to adjust value.
Quit item closes this menu.
POINT button
SELECT button
MENU button
POINT button
(outer ring)
SELECT button
MENU button
Menu icon
Pointer
(red frame)