Picture Freeze Function; No Show Function; P-Timer Function; Sound Adjustment - Sanyo PLC-XP50 Owner's Manual

BASIC OPERATION
Press FREEZE button on Remote Control Unit to freeze picture on-screen. To cancel FREEZE function, press FREEZE
button again or press any other button.
Press NO SHOW button on Remote Control Unit to black out image.
To restore to normal, press NO SHOW button again or press any
other button.
Press P-TIMER button on Remote Control unit. Timer display "00 : 00"
appears on screen and timer starts to count time (00 : 00 ~ 59 : 59).
To stop P-TIMER display, press P-TIMER button. And then, press P-
TIMER button again to cancel P-TIMER function.
DIRECT OPERATION
Volume
Press VOLUME (+/–) button(s) on Top Control or on Remote Control
Unit to adjust volume. Volume dialog box appears on screen for a few
seconds.
(+) button to increase volume, and (–) button for decreasing.
Mute
Press MUTE button on Remote Control Unit to cut off sound. To
restore sound to its previous level, press MUTE button again or press
Volume (+/–) button(s).
MENU OPERATION
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
SOUND Menu icon.
2 Press POINT UP/DOWN button to move a red frame pointer to
item that you want to select, and then press SELECT button.
Volume
To increase volume, press POINT RIGHT button, and press POINT
LEFT button for decreasing.
Built-in SP.
Press POINT LEFT/RIGHT button(s) to switch built-in speaker on and
off.
Mute
Press POINT LEFT/RIGHT button(s) to cut off sound. Dialog box
display is changed to "On" and sound is cut off. To restore sound to
its previous level, press POINT LEFT/RIGHT button(s) again.
22

PICTURE FREEZE FUNCTION

NO SHOW FUNCTION

P-TIMER FUNCTION

SOUND ADJUSTMENT

Message disappears after 4 seconds.
Indicates roughly level of
volume.
Press MUTE button to set
Mute function On or Off.
Display disappears after 4 seconds.
SOUND MENU
Indicates roughly
level of volume.
Close SOUND Menu.
SOUND Menu icon