Dissolved oxygen (do) and temperature pen (2 pages)
Summary of Contents for Myron L DS series
Page 1
THREE RANGE DS METERS Operation Instructions User Manual for Models 532T1 532T2 532M1 6115 Corte del Cedro Carlsbad, CA 92009-1516 USA Tel 760-438-2021 Fax 800-869-7668 / 760-931-9189 pH/Conductivity Instrumentation www.myronl.com Accuracy • Reliability • Simplicity...
Page 2
DESCRIPTION The pictures in this manual show the major operating parts of your Myron L DS Meter. Handle your DS Meter and identify these This manual describes your Myron L DS meter, tells you how to parts to become familiar with it.
DO NOT fix or modify the meter. That will void your warranty. meter's bottom label. If they are noticeably different, mark the See SERVICE for details or consult Myron L Company. new value in place of the old one. DO NOT DIP THE INSTRUMENT INTO WATER. If water does...
INTERNAL STANDARD value was developed by the Myron L Company over three decades ago. shown on the bottom label. For example: If the INTERNAL STANDARD value is 4.2, adjust the Master Calibration Control Sodium Chloride: For every ppm 442 Standard Solution, there until the reading is 2.1.
Page 5
Any service required other than battery replacement, cleaning, ORDERING or calibration must be referred to the Myron L Company. If you have any questions about this instrument, its use, or a particular To order accessories contact your nearest stocking distributor, or application, please contact the Myron L Company.
Need help?
Do you have a question about the DS series and is the answer not in the manual?
Questions and answers