Installing The Projector In Proper Position - Sanyo PLC-XE50 Owner's Manual

Installing the Projector in Proper Position

Install the projector properly. Improper Installation may reduce the lamp life and cause fire hazard.
Side A
Side C
Side D
✔Note:
– Fix the projector when installing it so that the
projector would not fall down.
Side B
Side E
Side F
10˚
10˚
This side is Side A or B.
5˚
5˚
5˚
5˚
Safety Instructions
CAUTION
– Do not put anything or sit on the
projector, otherwise, it may fall down
or cause failure of the projector or
injury.
Do not roll the projector more
than 10 degrees from side to
side.
Do not put the projector on
either side C or E to project an
image.
Do not roll the projector more
than 5 degrees from side to side
when side A or B is downward.