Smith's Heating First SS80E Installation And User Manual

Smith's Heating First SS80E Installation And User Manual

Space saver

Advertisement

Quick Links

Products with this symbol (crossed out wheelie bin) cannot be disposed as household waste. Old electrical
and electronic equipment must be recycled at a facility capable of handling these products and their
waste by-products. If you are purchasing replacement equipment your retailer may offer a 'take back'
scheme, or will be able to give details of the nearest approved authorised treatment facility. Proper
recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our
health and the environment.
WEEE Registered Code:
Accessory grilles which fit in place standard grille are available in different
colours and finishes. Please consult the price list for details. In the event of
any items missing or visible damage, please contact us on 01245 324560.
Please leave this Installation & User Guide and the Guarantee Registration
Card with the intended user.
Approved CQS ISO 9001:2008
For Ireland, contact MT Agencies (Ireland) Ltd on Tel: 00353 1 844 3212
8
July 2016
WEE/ED0093VW
issue 003
Space Saver
SS80E
Installation and User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SS80E and is the answer not in the manual?

Questions and answers

Summary of Contents for Smith's Heating First SS80E

  • Page 1 Please consult the price list for details. In the event of any items missing or visible damage, please contact us on 01245 324560. SS80E Please leave this Installation & User Guide and the Guarantee Registration Card with the intended user.
  • Page 2 Notes: __________________________________________ Safety Instructions __________________________________________ Read before continuing with installation or use of the product. __________________________________________ __________________________________________ Disconnection must be incorporated in the fixed wiring in accordance with the wiring rules. __________________________________________ __________________________________________ If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
  • Page 3 SS 80 mm Thermostat Wiring: The following items should be included in the carton: To link a room thermostat remove the electrical panel on the back of the unit by Product complete with stainless steel grille and plug and play lead. removing the 2 fixing screws (See below diagram) ...
  • Page 4 Fault Finding Isolate the electrical supply and connect the heater the electrical cable 1. The fan does not run/ no heat output ELECTRICAL to the 10A fused spur. The fused spur CABLE must not be directly above the heater Check the power supply is switched ON. but should be accessible after completion of the installation.
  • Page 5 Guarantee Statement Thank you for purchasing a Smith’s heater. It has been designed and manufactured to the highest quality standards to ensure it gives you efficient and trouble-free service for many years. To back up our commitment, included with your product is a free five year parts and labour guarantee.
  • Page 6 Guarantee Registration Card & Customer Satisfaction Survey User Details Dear Customer User Name Mr/Mrs/Miss/Ms/Other …………………………………………………………………………… We hope our product suits all your requirements; it would help us immensely if you could find the time to fill in this form, your response will help us maintain the quality standards we all expect in today’s climate. Initials ………………….

Table of Contents