Remote Control - Sanyo PLC-WXE45 Owner's Manual

Remote Control

③ ②
④
⑤
⑥
⑦
⑧ ⑨
You can turn on or operate the
projector ONLY via the remote control.
Make sure not to lose the remote
control.
①
POWER ON/STAND-BY button
Turn the projector on or off (pp.18, 19).
①
②
VIDEO button
Select VIDEO input port (pp.23, 34).
③
COMPUTER button
Select COMPUTER input port (pp.23, 25, 35).
④
MENU button
Open or close the On-Screen Menu (p.20).
⑤
Point
– S elect an item or adjust the value in the On-Screen Menu.
(p.20)
– Pan the image in Digital zoom + mode (p.33).
⑮
– Adjust the volume level (Point
⑥
SELECT button
– Execute the selected item (p.20).
– E xpand or compress the image in Digital zoom mode.
⑭ (p.33)
⑦
⑬ D.ZOOM
Zoom in and out the images (pp.24, 33).
⑫
⑧
FREEZE button
Freeze the picture (p.23).
⑪
⑨
NO SHOW button
Temporarily turn off the image on the screen (p.24).
⑩
LAMP CONTROL button
Select the lamp mode (pp.24, 46).
⑪
MUTE button
Mute the sound (p.23).
⑫
P-TIMER button
Operate the P-timer function (p.24).
⑩
⑬
IMAGE button
Select the image level (pp.24, 30, 37).
⑭
AUTO PC button
Automatically adjust the computer image to its optimum
setting (pp.24, 27).
⑮
KEYSTONE button
Correct the keystone distortion (pp.22, 41).
To ensure safe operation, observe the following precautions:
– D o not bend, drop, or expose the remote control to moisture
– F or cleaning, use a soft dry cloth. Do not apply benzene,
Part Names and Functions
▲▼◄►
(VOLUME + / –) buttons
▲▼
buttons
or heat.
thinner, spray, or any other chemicals.
buttons) (p.23).
◄►
11